Ft. Bragg/Fayetteville Rotary Owners
#101
RX family
Join Date: Sep 2011
Location: Florida, Ohio,South Carolina
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I also have a 93 FD R1 all stock thaat I show, and the wife has copper red shinka, and I have a Gt the two 8's are 342 vin numbers apart. Will be drive through Fayt. 9/6-7 for a confer. in Sanford not sure which car we will bring
#105
Full Member
Join Date: Aug 2012
Location: Fayetteville, NC
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
bro, im in fay man. lol i live in raleigh but i come back every 2 or so weeks to visit my family here. but im currently in fay as im typing this. hit me up! it gets a little lonely being the only rx7 in the car meet here sometimes :,( lol
#113
Jason
iTrader: (2)
well at the moment it just keeps flooding and will not start. I keep unflooding it and as soon as I try to start it again it floods. I guess a little history would help. It is a freshly rebuilt engine that has been sitting for about a year while i was gathering parts. When I first started trying to get it running again (about a month ago) the starter would not do anything. I bypassed the starter cut relay and then the starter started working. After the starter started working then I didn't have fuel or rpm reading on my commander. I swapped the cas sensor connectors and that resolved that issue. Next I didn't have spark (as a side note I'm running a rywire engine harness) and found that I unplugged the coil pack and forgot to plug it back in. So now I have fuel, spark, and starter functioning. The engine was extremely flooded from when I tried to run it after the rebuild. After the rebuild I found that my oem harness was bad and was causing the injectors to stick open. It ran but was very hard to get started and smoked really bad, I could tell it was getting way to much fuel. So I took the engine apart again to remove the oem harness. Now everything is back together with a new harness, I also sent the injectors out to be cleaned and they all checked out fine. I did a compression test today and it looked fine. Been trying to unflood it all day today (using the extended method with atf) with no luck.
#125
Senior Member
iTrader: (5)
oh, I am currently deployed, but before i left, i sold the silver one on the pic to my neighbor, then there is a light blue one with mesh wheels that belongs to an old man, and a tampa blue like mines that belong to a Rican guy that works on autozone, all within raeford