that is some ****** dark tint

 

i like pizza

 

Me too.

 

pizza is yummy, and yeah, i like TINTED windows.. one less thing i have to spend money one.

 

My window tint DEFEAT ALL MAN.

 

Im on my way, to take the drain plug out of the gas tank, let it all drain out, or whats left anyways.

Picked up some sanding disc and pads for the drill ( its like a portable orbital sander)
but cost way less!!! made my those kind folks at 3M...
I got some wet paper and some fine grit pads too...
I need primer still.
I also got some bondo ( GOLD) IT HAS A RX7 on the front.
Humm.. Off to work for a while... and yeah, Im taking step by step pics.

 

Eh, sanding with a drill kinda sucks because it's hard to keep even pressure and it doesn't have the same motion of a random orbit. Good luck with it though. I always laugh when I see that bondo. Are they trying to tell us something??

 

Well, If all goes well, i might have a orbital sander by saturday.

Derrick will be here before 6pm, so those of you who want to come early you can, i will have beer and food on hand.. and who knows what else.

IF ANYONE HAS ANY RANDOM PARTS I MIGHT BE ABLE TO USE BRING THEM! WE CAN WORK OUT A DEAL OR SOME ****!!


SO

Who all THINKS they are going to make this damn MEET IM SO KINDLY HOSTING????
COME ON!!! IV EBEEN HUFFING OLD GAS AND RUST! SOMEONE ANSWER!!!!! WEEEEEEEEEEEEEEEEEEEEEEEEE!!!

Yes, I am still like a fat kid sitting at a table with a big ******* cake..
only imma skinny kid, with a big white wide body rx7.

 

HERE THIS MIGHT FREAKING HELP YALL!

<a href="http://www.mapquest.com/directions/main.adp?do=nw&long=%2d84042259&2n=BLOUNT%20COUNTY &height=869&1y=US&r=f&1z=37801&2a=6151%20Bingham%2 0Ln&mo=ma&2s=TN&2c=Maryville&dtype=s&2si=navt&2da= %2d1%2e000000&2rc=L1AAA&1n=BLOUNT%20COUNTY&cl=EN&w idth=1280&2v=ADDRESS&lat=35686746&did=1185924724&q q=1ADqpk24ofD8MtkRNP%252by8QsfrmRw4WF8yRgE5W%252ft 6Ec1yqyFjgw8X4DbGztTxfGv%252fdBeB0z%252bSJC%252bdn hZGBHWBZK94j2IWlEE5jq0AvOw3X8Jqreeh5FLKj1zBsvPlAWR I4uJnsMbzbR0h7U9FxCgOLo8gWkoKgGlCr48wpk4skolyYMNj4 2THJol2SUS8nOMu0vA62p6w7ETZfOx7OED8n7vSVm1MSzq3jSW HofBUjeigrHvNB96HMC%252fOxlehfjgKrMymVtNu%252fLKKM pjP7nlwrpZD53Kzr1ep1bNCzYR9tlOYQTpdhNCvu8Y%252bnfE BTcMEMmraWYiPbIWUI52awSzRg%253d%253d&2gi=YJtN9pQ9R kOD%2bGMVgaSm0Q%3d%3d&1a=%5b349%2d364%5d%20Foothil ls%20Mall%20Dr&2y=US&un=m&2z=37801%2d0840&1s=TN&1c =Maryville&zoom=8&go=1&rsres=1&1v=STREET&ct=NA&1l= EGUtLFZ1n887d/Sym6umoA==&1g=FSp6bNUo5K37N2HKlg4uKg==&2l=mP3TL/ZO8ZLtmRXKVELCkg==&2g=WwVcvtLBh4ZxE9k/W+/o6w==">Driving Directions from [349-364] Foothills Mall Dr, Maryville, TN to 6151 Bingham Ln, Maryville, TN</a>

 

http://www.mapquest.com/directions/m...ZxE9k/W+/o6w==


This will get you from that 4-way stop at foothills mall drive, like your going towards the dragon..

EASY AS HELL

Derrick knows my number, if yall need it PM me.

 

Alyssa (NeatoCheetoFB) and I will be there (- the Cheeto). I think Brillo still has my orbit sander... or whoever borrowed it last, I can't remember. Where are we meeting? My goal is to not get lost this time. I know that's asking a lot... What parts do you need specifically? Most of the stuff I have laying around is red 81-83 interior parts.

 

Eh, I got all the **** for the inside.
Humm And its EASY to find, man really.. I will be meeting random people when they get to 129 market and leading them back to my house. Derrick said he will be at my house before 6, soo time is anytime between 4:00-??:??

So.. YEAH! and hell I need hoses and ****, cause the ones on the car are slightly crusty.

umm The hatch is stuck or locked, and they key hole is no longer there, due to the wing.. i need hatch open.. im thinking its melted to the seals.

Umm.. bring anything that can be of use.. hell anything you might randomly think of... tools,parts,beer, single females...anything you might want cooked that might not be on hand...

 

It concerns me you put those 2 together.

 

Hey Derrick... you have a compression tester right? We should have a compression test party and check everyone's numbers.

And Hellbent, maybe you should start a new thread to get the word out... unless you wanna keep it small or something.

 

Holy ****! almost 2,000 post!

-Rick James,
Bitch!

 

rx-7 club knows about our thread that only like two of us use.

Anyway do you have air tools? If so I'd like to bring my exhaust and get that done. If not maybe if I don't have my rediator in we can do that.. that is IF I actually make it. lol

 

recently my clutch went out and screwed up my flywheel and pressure plate at the same time.... and im looking at getting new ones and i found a clutch and flywheel but they say for the turbo model... will they work on a non turbo rx7?

 

no suh

 

Umm small event man, like LOCALS.. people I kinda know..
and.. air tools? Im working on THAT maybe by saturday i will have that 20 GAL tank.
and IM NOT GOING TO COOK THE SINGLE FEMALES!!! even tho, females are tasty.. he he he...

 

OK for those of you who "dont know if I will make it"
you show up or i eat your first child!!!
I mean, c'mon how many chances ya got to have a cookout and work on sevens, and be 15mins from The Dragon???? ALL AT ******* ONCE!!!

 

no doubt, I would be there, but its my last day with my daughter, so she wins no matter what. Good luck guys and next time I am in town I will try to make it on a meet! I might see you guys up on the dragon, either on friday or saturday, my daughter wants a ride on the dragon in daddy's race car, so how can I tell her no!

 

Oookay... so if I somehow "fail" to make it, will you eat any accidental child I cause? Plan C... that could come in handy. I'd like to get this in writing.

Derrick - compression tests?

 

OK so its 7:45 AM, My "Friend" and co-worker was going to help me to the body work today, he is a hour late... SO I have been taking out the seats and cleaning them along with the carpet. I got a Orbital Sander also.. So, Umm As far I know like in stone, Derrick will be here! Liz and Alyssa?? did i spell that right??
Yeti?? who else, cause if its just me and Derrick.. well.. i cant eat all that food and i dont see derrick helping me drink all the beer..

SO IF ANYONE IS GOOD AT BODY WORK PLEASE HELP ME OUT! Its nothing Major at all really.. OK back to cleaning the inside of the car. later guys.

 

Welp, I don't drink, especially when working on cars. That's how V8 swaps happen. No help there. I can do bodywork though. Not very well. Do you have a dent puller and a drill? Alyssa and I are definite. We'll meet you at the 129 market at 6 unless you have other ideas. Do you have primer yet? Not good to do bodywork until you're ready to cover it. I'll give Brillo a call and see if he can make it tomorrow.

 

Im bringing any and every tool i can find thats mine, including comp tester, speed jack, jack stands, pry bars from hell...ummm dremel...and a few other odds and ends