Pac new world record
Thread Starter
pushing s##t up hill
Joined: Jan 2008
Posts: 1,040
Likes: 0
From: ya mums kitchen
Pac new world record
THE BOYS DONE IT AGAIN 
6.74@ 205 yeeeehhhhhhhhaaaaaaaa
Listen live to the racing rock is online now talking
http://energy08.egihosting.com/18321
thread down unda
http://www.ausrotary.com/viewtopic.php?f=56&t=195126
6.74@ 205 yeeeehhhhhhhhaaaaaaaa
Listen live to the racing rock is online now talking
http://energy08.egihosting.com/18321
thread down unda
http://www.ausrotary.com/viewtopic.php?f=56&t=195126
Thread Starter
pushing s##t up hill
Joined: Jan 2008
Posts: 1,040
Likes: 0
From: ya mums kitchen
Trending Topics
talking head
Joined: Apr 2008
Posts: 2,775
Likes: 15
From: Perth, WA, OZ
you dont know??
the good one !!!
haltech ,, world rotary no1 , maybe they should make a sticker for all their ECU's??
2 events on the good ECU and already the big one is in the bag
just goes to show that perhaps the microtech was holding them back all this time
the good one !!!
haltech ,, world rotary no1 , maybe they should make a sticker for all their ECU's??
2 events on the good ECU and already the big one is in the bag
just goes to show that perhaps the microtech was holding them back all this time
Thread Starter
pushing s##t up hill
Joined: Jan 2008
Posts: 1,040
Likes: 0
From: ya mums kitchen
after thy got the record rocky was online talking about it, he mentioned that with some development and power increases in the next 12 to 18 months they will be taking it to the 2j "buy" a race car racers
Rotary for life
Rotary for life
Are the running the new Haltech platinum?
Thread Starter
pushing s##t up hill
Joined: Jan 2008
Posts: 1,040
Likes: 0
From: ya mums kitchen
yes sir they are 
there is some small debate as to whether its got a misfire under load down the track, a common old fault from haltech , but i think its just hitting limiter on gear shifts
There is alot of knuckle dragger's who are trying to do their best in discrediting the new computer. To scared to try a change in my opinion . The rest of the computer world has moved on but the microtech has not
there is some small debate as to whether its got a misfire under load down the track, a common old fault from haltech , but i think its just hitting limiter on gear shifts
There is alot of knuckle dragger's who are trying to do their best in discrediting the new computer. To scared to try a change in my opinion . The rest of the computer world has moved on but the microtech has not
Full Member
Joined: Aug 2007
Posts: 61
Likes: 0
From: On The Two Step
Its was an ok run in the final if Rocky hadn't lifted because he was in a class that races on index's the car would have gone a 6.70 ,was a great weekend Rocky won the final and was pretty on constant and still had all 3 rotors at the end next time 6.6
Inc for the 6.74 run
60ft 1.058
330 2.876
1/8 4.36
mph 165.62
1000ft 5.651
1/4 6.745
mph 205
Inc for the 6.74 run
60ft 1.058
330 2.876
1/8 4.36
mph 165.62
1000ft 5.651
1/4 6.745
mph 205
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Thread Starter
pushing s##t up hill
Joined: Jan 2008
Posts: 1,040
Likes: 0
From: ya mums kitchen
pac at the track today. 16th october 2010
http://www.youtube.com/watch?v=_acQMkfMvIE
http://www.youtube.com/watch?v=_acQMkfMvIE
Thread
Thread Starter
Forum
Replies
Last Post
frosty1993
General Rotary Tech Support
3
Sep 30, 2015 01:27 PM