the porting has started
Thread Starter
Joined: Aug 2001
Posts: 3,103
Likes: 1
From: Nago Okinawa
the porting has started
take a look only the Exhaust Ports being worked on right now. will update ya when the intakes ports get hit on.
http://bdc.genxracing.com/TonyFarkas
http://bdc.genxracing.com/TonyFarkas
Thread Starter
Joined: Aug 2001
Posts: 3,103
Likes: 1
From: Nago Okinawa
took out the motor and frame and rails. I never use the sunroof anyway. and its more weight I can drop.
jspecracer7 can you stop a "My House" and get me teriyaki chicken rices extra sauce?
jspecracer7 can you stop a "My House" and get me teriyaki chicken rices extra sauce?
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally posted by 87GTR
took out the motor and frame and rails. I never use the sunroof anyway. and its more weight I can drop.
took out the motor and frame and rails. I never use the sunroof anyway. and its more weight I can drop.
mike
Trending Topics
Rotary Enthusiast
Joined: Aug 2001
Posts: 1,024
Likes: 1
From: Memphis, TN - wishin' i was back in Ft Worth
hey man, did santa claus wipe his *** in your engine compartment when he crawled out of your chimney? what's up with all that soot? seriously? turbo go out or just another case of the exhaust gasket demons?
Thread Starter
Joined: Aug 2001
Posts: 3,103
Likes: 1
From: Nago Okinawa
its from the waste gate open right there.
The pipe that is connected to the wastegate is way too small just around 1" I was over boosting like crazy.
getting 14psi on a 8psi spring.
I guess the guys at RP though, we got some extra pipe lets throw it on his waste gate and see what happens.
so I took off the pipe and over boosting was fixed. I never got around to getting a bigger one made. so when then wastegate opens up it dumps that 1400 deg air right there.
a new pipe is being made and 2 gal of simple green are in route to the engine bay
The pipe that is connected to the wastegate is way too small just around 1" I was over boosting like crazy.
getting 14psi on a 8psi spring.
I guess the guys at RP though, we got some extra pipe lets throw it on his waste gate and see what happens.
so I took off the pipe and over boosting was fixed. I never got around to getting a bigger one made. so when then wastegate opens up it dumps that 1400 deg air right there.
a new pipe is being made and 2 gal of simple green are in route to the engine bay
Thread Starter
Joined: Aug 2001
Posts: 3,103
Likes: 1
From: Nago Okinawa
Those have knock sensor holes in them, so they're T2 housings. Am I right? I've got a junked T2 housing without the knock sensor.
Last edited by Jeff20B; Aug 16, 2002 at 01:35 PM.
Senior Member
Joined: Aug 2002
Posts: 419
Likes: 1
From: Sundbyberg,Sweden
Nice job 87GTR!
But iwonder how many mm you have port it down (earlier opening) and up (later closening) becausse i am doing 2 rebuilds and streetporting of gen-3 engines. Best wishes from a really hot Stockholm!
But iwonder how many mm you have port it down (earlier opening) and up (later closening) becausse i am doing 2 rebuilds and streetporting of gen-3 engines. Best wishes from a really hot Stockholm!
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
Originally posted by Jeff20B
Those have knock sensor holes in them, so they're T2 housings. Am I right? I've got a junked T2 housing without the knock sensor.
Those have knock sensor holes in them, so they're T2 housings. Am I right? I've got a junked T2 housing without the knock sensor.
mike
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM