Hey, im looking into getting my 13b ported, but im not sure what the best way to go would be. Im looking for 300-400hp on a drift/scca set up. Im new into the rotory porting and was just wandering what is good and what isnt. Any ideas welcome. Thanks

 

Sounds like you need a turbo and big budget.

 

If your looking at full race stuff look into a P-Port or if your looking at something streetable look at Cosmo RE/FD big ported motor with a large carby. The Gene Berg 58mm, Geers Engineering 62mm or a Weber 55 DCO should do the trick. The cheapest carb of the three units is the 55 DCO. It all really depends upon what your budget is for the project. If money is a issue stay the hell away from turbo charging it can be very expensive.

Good Luck.

 

Bloomington, IN?

 

Yeah i live in Bloomington In, but im looking for a streetable drift. I know im looking into a expensive project but i dont care. I think im just going to do a street port stage 2. That seems to be a good porting job. and a t05/t06 turbo. I just need something to do im bord and need to get my hands dirty.

 

If you need some porting work done, let me know. Toss me a PM and I'll show you my work along with my rates.

B