9.7 sec untubbed rx4 on FULLboost
#1
Australian Idle
Thread Starter
Join Date: Jan 2002
Location: Canberra, Australia
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
9.7 sec untubbed rx4 on FULLboost
check this car.
With development by Maztech of Melbourne (Anthony Rodrigues) is is running 9.79's, untubbed on 10 slicks. With street interior and gearbox!
Click me and all will be revealed
FULLboost rocks.
#3
Old [Sch|F]ool
They're as heavy as FCs and FDs, they they're not THAT "big". With the longer wheelbase compared to the RX-3 they could launch harder. And they don't look ugly, they look killer (Not as good as the -3 of course, but better than any RX-7 that's for sure)
#5
Rotary Freak
Join Date: Jan 2002
Location: l.a.
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Not to take anything away from this car, but this isn't that quick considering the Titan Motorsports Supra just ran a 9.41 in NHRA street class. That's on drag radials and IRS.
Trending Topics
#8
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fdracer
Not to take anything away from this car, but this isn't that quick considering the Titan Motorsports Supra just ran a 9.41 in NHRA street class. That's on drag radials and IRS.
Not to take anything away from this car, but this isn't that quick considering the Titan Motorsports Supra just ran a 9.41 in NHRA street class. That's on drag radials and IRS.
#9
Rotary Freak
Originally posted by fdracer
Not to take anything away from this car, but this isn't that quick considering the Titan Motorsports Supra just ran a 9.41 in NHRA street class. That's on drag radials and IRS.
Not to take anything away from this car, but this isn't that quick considering the Titan Motorsports Supra just ran a 9.41 in NHRA street class. That's on drag radials and IRS.
#10
Rotary Freak
Join Date: Jan 2002
Location: l.a.
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I give this car full props, but you guys can't make excuses when other cars are faster. We don't complain when Ari, Abel, Sammy, Marcos, Adam, etc. spend a **** load of money on their cars. It wasn't fair when Ari was wiping the floor with Supra's and people complained the RX7 was too light, just as it isn't fair that we now turn around and say the Supra has too much torque.
#11
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
#12
Rotary Freak
Originally posted by Anthony Rodrigues
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
#13
Full Member
Join Date: Aug 2001
Location: Canberra, Australia
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Judge Ito: The orange RX3? if thats the one you are referring to it now owned by a guy in South Australia, and afaik its going to be hopefully racing within the next 12 months? maybe?
Back on topic that RX4 does some of the most awesome wheelstands I have ever seen from a street car
Damo
Back on topic that RX4 does some of the most awesome wheelstands I have ever seen from a street car
Damo
#14
Australian Idle
Thread Starter
Join Date: Jan 2002
Location: Canberra, Australia
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
G'day Coffin!
neat wheelies for a relatively long wheelbase rx!
Judge - keep your eyes on fullboost, there will probably be more of A777's pics on there when he returns from his jaunts around the world. Did you remember that thread about the orange R100 13bt streeter from Australia, that was also on Fullboost? and the dude had matching orange hair... well that's Ben and he now owns Anthony's old RX3 - which is now red and has fitted a 20b!!! (as you do...)
neat wheelies for a relatively long wheelbase rx!
Judge - keep your eyes on fullboost, there will probably be more of A777's pics on there when he returns from his jaunts around the world. Did you remember that thread about the orange R100 13bt streeter from Australia, that was also on Fullboost? and the dude had matching orange hair... well that's Ben and he now owns Anthony's old RX3 - which is now red and has fitted a 20b!!! (as you do...)
#15
Rotary Freak
Originally posted by buzz
G'day Coffin!
neat wheelies for a relatively long wheelbase rx!
Judge - keep your eyes on fullboost, there will probably be more of A777's pics on there when he returns from his jaunts around the world. Did you remember that thread about the orange R100 13bt streeter from Australia, that was also on Fullboost? and the dude had matching orange hair... well that's Ben and he now owns Anthony's old RX3 - which is now red and has fitted a 20b!!! (as you do...)
G'day Coffin!
neat wheelies for a relatively long wheelbase rx!
Judge - keep your eyes on fullboost, there will probably be more of A777's pics on there when he returns from his jaunts around the world. Did you remember that thread about the orange R100 13bt streeter from Australia, that was also on Fullboost? and the dude had matching orange hair... well that's Ben and he now owns Anthony's old RX3 - which is now red and has fitted a 20b!!! (as you do...)
#16
Rotary Freak
Join Date: Jan 2002
Location: l.a.
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Anthony Rodrigues
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
#17
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fdracer
what's an RB30?
what's an RB30?
An RB30 is an engine that would appear to have only been available in Australia. Its a Nissan based engine that was used in the Holden (GM) VL model Commodore.
Here is one of the quickest VLs in the country (world maybe?) Quickest time to date is a 9.39 @ 147.
And here is what a standard RB30T looks like
As it is from the RB series of Nissan engines, the GTR engine is almost a bolt in fit I think as are the numerous head swaps available from other RB engines (an RB25 head swap is a popular one). The RB30 is a single cam unit.
Hope that helps
#18
Rotary Freak
Originally posted by Anthony Rodrigues
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
Thanks Guys,
That is a customers car on a limited budget and it has done exactly what he is asking of it. We are currently fitting a Rajab Bros RB30 into a 1st gen Rx7, this should answer some questions. The Supra of Titan Motorsports is a credit to them, Ari's 7 is a credit to him and this is also a credit to all involved. No excuses needed!
Regards-Anthony
#19
Rotary Freak
Join Date: Jan 2002
Location: l.a.
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AJC13B
As it is from the RB series of Nissan engines, the GTR engine is almost a bolt in fit I think as are the numerous head swaps available from other RB engines (an RB25 head swap is a popular one). The RB30 is a single cam unit.
Hope that helps
As it is from the RB series of Nissan engines, the GTR engine is almost a bolt in fit I think as are the numerous head swaps available from other RB engines (an RB25 head swap is a popular one). The RB30 is a single cam unit.
Hope that helps
#20
Judge,
Dont worry! As you know my involvement with EFI and other race teams means that I must also develop for other engine types(the dark side). I decided on the 1st gen because they are cheap and drive very straight. At 150+ we need allthe friends we can get. RB is a Nissan engine code and are an impressive 6cyl, I also am friends with the Rajab Bros who are second to noyone with this type of engine. If you are interested, I will catch up to you in about 3weeks when I will be back in NJ. Perhaps there is other forum users that would like to catch up with Rohan and I then aswell. I will tell you of my plans then.
Regards-Anthony
Dont worry! As you know my involvement with EFI and other race teams means that I must also develop for other engine types(the dark side). I decided on the 1st gen because they are cheap and drive very straight. At 150+ we need allthe friends we can get. RB is a Nissan engine code and are an impressive 6cyl, I also am friends with the Rajab Bros who are second to noyone with this type of engine. If you are interested, I will catch up to you in about 3weeks when I will be back in NJ. Perhaps there is other forum users that would like to catch up with Rohan and I then aswell. I will tell you of my plans then.
Regards-Anthony
#21
10.32 @ 133
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fdracer
Do you mean that you can swap the single cam RB30 head with the RB25/26 to make it a twin cam? I've never heard of single to twin cam swaps before.
Do you mean that you can swap the single cam RB30 head with the RB25/26 to make it a twin cam? I've never heard of single to twin cam swaps before.
#22
Rotary Freak
Originally posted by Anthony Rodrigues
Judge,
Dont worry! As you know my involvement with EFI and other race teams means that I must also develop for other engine types(the dark side). I decided on the 1st gen because they are cheap and drive very straight. At 150+ we need allthe friends we can get. RB is a Nissan engine code and are an impressive 6cyl, I also am friends with the Rajab Bros who are second to noyone with this type of engine. If you are interested, I will catch up to you in about 3weeks when I will be back in NJ. Perhaps there is other forum users that would like to catch up with Rohan and I then aswell. I will tell you of my plans then.
Regards-Anthony
Judge,
Dont worry! As you know my involvement with EFI and other race teams means that I must also develop for other engine types(the dark side). I decided on the 1st gen because they are cheap and drive very straight. At 150+ we need allthe friends we can get. RB is a Nissan engine code and are an impressive 6cyl, I also am friends with the Rajab Bros who are second to noyone with this type of engine. If you are interested, I will catch up to you in about 3weeks when I will be back in NJ. Perhaps there is other forum users that would like to catch up with Rohan and I then aswell. I will tell you of my plans then.
Regards-Anthony
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM