720's and 1600's on a stock port S4
#1
720's and 1600's on a stock port S4
I wanted to know what you guys thought about how my motor will run if i run 720 primaries and 1600cc secondary injectors. The motor is a stock S4 TII motor. To4e, Haltech E6S-8, FMI, 3"DP, 3" exhaust out the back with a hi flo cat, HKS twin power ignition box. Is it gonna run or crap out, I would like to run about 18psi boost. let me know what your thoughts are.
#3
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
I think the injectors will work fine, but I think it is going to "crap out" if the engine is just a worn stock block. Most people only run about 12-14psig on the T04E series turbos.
#5
Pew Pew Pew
Join Date: Mar 2001
Location: sunshine coast Australia
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
im running a to4e with a 66mm front wheel and i gunna run 18psi. ive got 880 primaries and 1240 secondaries ill see hoe it goes when i get it on the dyno
Trending Topics
#8
I am running 720/1600 in a s4 block. I have already completed my breakin. I would suggest using the stock injectors until the breakin is complete. I have been messing with my haltech e6x and I have been flooding out the motor. I wouldn't want to do this to many times on a fresh rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM