I wanted to know what you guys thought about how my motor will run if i run 720 primaries and 1600cc secondary injectors. The motor is a stock S4 TII motor. To4e, Haltech E6S-8, FMI, 3"DP, 3" exhaust out the back with a hi flo cat, HKS twin power ignition box. Is it gonna run or crap out, I would like to run about 18psi boost. let me know what your thoughts are.

 

Rebuilt engine?

-Ted

 

I think the injectors will work fine, but I think it is going to "crap out" if the engine is just a worn stock block. Most people only run about 12-14psig on the T04E series turbos.

 

yes..rebuilt ...zero miles

 

im running a to4e with a 66mm front wheel and i gunna run 18psi. ive got 880 primaries and 1240 secondaries ill see hoe it goes when i get it on the dyno

 

Sweet, definantly keep me posted... what engine is it and is is stock or ported?

 

One more thing, since the motor is fresh with zero miles i have put the 720 in the primaries and have 550 sitting in the secondary position at the moment. This is for break in, but once i have a few miles on the motor i plan on swapping out the 550's for my 1600's

 

I am running 720/1600 in a s4 block. I have already completed my breakin. I would suggest using the stock injectors until the breakin is complete. I have been messing with my haltech e6x and I have been flooding out the motor. I wouldn't want to do this to many times on a fresh rebuild.

 

Is it flooding when you try to start it or while it is running?