Racing Kills Lounge The RX-7 Club and IB in no way supports or endorses illegal street racing in any way, shape or form, and highly recommends against any illegal activities.

Killed an FD last night

Thread Tools
 
Search this Thread
 
Old Jul 21, 2006 | 06:11 AM
  #76  
F.T.P. rotaryrocket's Avatar
forcefed 240
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 123
Likes: 0
From: morgantown, west virginia
Originally Posted by crazy9ceguy
So i was at a meet and this red FD showed up with rebuilt motor and street port about 2000 miles ago, stock twins, front mount intercooler, hks carbon Ti catback and haltech ecu boosting 14 psi. I am running a 95 S14 with SR20 and garrett GT2871R, rom-tuned ecu, z32 maf, and 555cc injectors, with apexi intake, blitz intercooler, blitz downpipe and apexi gt spec catback.

Anyways after the meet we decide to do a couple runs on the freeway, we started at 60 mph, 1st race i pulled on him pretty good. 2nd race wit hthe same results, 3rd raced we started slower so i was in 2nd gear and he was keepin up for a little while, but once i hit 3rd i was gone.

So yea, anotehr FD down, 3rd FD i killed
fellow sr20 240 driver :-) nice kill? i want your turbo :-P hehe. i still have that silly t25 but i did smoke a turbo KA yesterday. Do you have any pics of your baby?
Reply
Old Jul 21, 2006 | 06:28 AM
  #77  
F.T.P. rotaryrocket's Avatar
forcefed 240
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 123
Likes: 0
From: morgantown, west virginia
Originally Posted by chinaman
I understand that FD's will loose from time to time but I must agree that this FD was not running properly. A streetported fd with an Haltech even on stock turbos, if tuned right and there are no problems with the turbos, should be seeing over 300 hp.

I must disagree with Henessey about this guy and the disrespecting of fd's. He only posts when he beats an fd. He said the last one was the 3rd. Leading me to believe he does'nt like fd's and is hunting them down. Why will he not agree to an organized race? Is it because if he runs an fd and looses he would like to take his frustration out on some innocent motorist?
1 an sr20 tuned right with a gt2871r(a sexy *** turbo) will be more than a challenge for a modded fd. plus the two cars body weights are very similar.
2. if you guys did your homework that turbo plus a good tune will easily put down over 320whp with alot more room to make power.
3. you guys are getting all butt hurt over an internet forum? what did he say that was so bad. he wasn't talking smack on the FD until some members on here wanted to get into an internet pissing contest. even then he never said anything bad about the FD. yeah it's an rx-7 forum but everybody is welcome here.

I use to have a fc untill it bit the big one and now i have an s13 with a redtop. you guys really need to chill out. you just instigate and then when he responds to your antics he's the bad person? grow-up.
Reply
Old Jul 21, 2006 | 09:25 AM
  #78  
The Driver's Avatar
Diamond Cut Seven
Tenured Member 15 Years
iTrader: (4)
 
Joined: Apr 2006
Posts: 1,446
Likes: 1
From: with all the rare parts
SR20 is god's gift to 4 bangers... Rb26 is gods engine... almost 13B,nah 20B maybe 27B... Hell yes...
Reply
Old Jul 21, 2006 | 10:00 AM
  #79  
rt turbo's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 693
Likes: 0
From: charlotte, nc
Originally Posted by F.T.P. rotaryrocket
1 an sr20 tuned right with a gt2871r(a sexy *** turbo) will be more than a challenge for a modded fd. plus the two cars body weights are very similar.
2. if you guys did your homework that turbo plus a good tune will easily put down over 320whp with alot more room to make power.
.
Il say this: my car running 14psi makes 359whp on stock non-seq. twins... This other guy's rx7 definatly was no where near. my rx7 runs properly. this guys s40 probably isnt making more than 340whp with that boost on that turbo. im not saying he didnt beat him, or making excuses for the other car. im simply saying, he would not have beatin my properly running FD on 14psi. furthermore, an rx7 with a single turbo upgrade to make this more comparable would eat up and spit out this guys 240.

Last edited by rt turbo; Jul 21, 2006 at 10:06 AM.
Reply
Old Jul 21, 2006 | 10:03 AM
  #80  
rt turbo's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 693
Likes: 0
From: charlotte, nc
Originally Posted by Fd3s4e
SR20 is god's gift to 4 bangers... Rb26 is gods engine... almost 13B,nah 20B maybe 27B... Hell yes...
ahh, i agree with the rb26 and 20b-and 4 rotor, but i think the EVO 4g63 is God's 4 banger.
Reply
Old Jul 22, 2006 | 08:08 AM
  #81  
chinaman's Avatar
Rotary Freak
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 1,803
Likes: 0
From: Macungie, Pennsylvania
Originally Posted by F.T.P. rotaryrocket
1 an sr20 tuned right with a gt2871r(a sexy *** turbo) will be more than a challenge for a modded fd. plus the two cars body weights are very similar.
2. if you guys did your homework that turbo plus a good tune will easily put down over 320whp with alot more room to make power.
3. you guys are getting all butt hurt over an internet forum? what did he say that was so bad. he wasn't talking smack on the FD until some members on here wanted to get into an internet pissing contest. even then he never said anything bad about the FD. yeah it's an rx-7 forum but everybody is welcome here.

I use to have a fc untill it bit the big one and now i have an s13 with a redtop. you guys really need to chill out. you just instigate and then when he responds to your antics he's the bad person? grow-up.
Bro, are you blind and can not see afar off? There is no need to say anything bad about the fd when you already have by posting "killed an fd last night" and it's your 3rd post, same title and, you don't own one... Is'nt it obvious to yo that this guy is looking for a fight? What part of my post did you read and ASSume that I was upset about an fd loosing a race? Someone has to loose in order for someone to win. If you race, you're eventually going to be on the loosing side somewhere down the road.

There was a video a little while back with an FD racing a Supra. Supra pulled away, no fight there. It was the guy that owned the FD that posted the video. You got to be a damn fool to thing that the fd is unbeatable. I personally don't have a problem with this guy beating the 7. I just don't like the fact that with the fight he is picking, with his tuned and proper running car, he does'nt want to run an fd that is tuned and running well.
Reply
Old Jul 22, 2006 | 11:57 AM
  #82  
WNT2CREALPAIN's Avatar
From Start 2 Finish
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 261
Likes: 0
From: Motown
Race from a dig... roll racing is gay!

Who is the owner of this fd? 2000 on a rebuild and he's already racing.
Reply
Old Jul 22, 2006 | 12:13 PM
  #83  
maduhbee's Avatar
Love me for my car
Tenured Member 15 Years
 
Joined: Nov 2004
Posts: 534
Likes: 0
From: california
my friend just broke 1033 on his WW EVO 9 MR.... changed the oil (nightmare) as he didn't get the oil filter on right! Oil sprayed all over the drive way! He was so pissed haha. Anyway, went to a 24hr wallmart, turns out they had a 5 quart Mobil 1 advanced formula for $28 bucks. way cheaper than crapzone's $42 for 5 quarts. Changed his oil again, and everything smoothed out!!! Let me drove his car for a little bit (because he felt bad it was on MY driveway). anyway, long story short, his EVO MR was fun as heck. And amen to that 4g63's being god's gift to 4 bangers!
Reply
Old Jul 22, 2006 | 06:49 PM
  #84  
Henessey's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 615
Likes: 0
From: va
I understand that FD's will loose from time to time but I must agree that this FD was not running properly. A streetported fd with an Haltech even on stock turbos, if tuned right and there are no problems with the turbos, should be seeing over 300 hp.

I must disagree with Henessey about this guy and the disrespecting of fd's. He only posts when he beats an fd. He said the last one was the 3rd. Leading me to believe he does'nt like fd's and is hunting them down. Why will he not agree to an organized race? Is it because if he runs an fd and looses he would like to take his frustration out on some innocent motorist?
i see your side. Im confused why he wouldnt mess around with a planned run. If he posted here he would be asking for trouble.... But like the guy said everyone is welcome here, as long as its not disrespectful. When he said another fd down, that was asking for trouble. As for 240 guy, id back up what you came here to do or dont post in the kills section again, its asking for trouble and its a war you wont win.


Race from a dig... roll racing is gay!
no rolls, i dont like fat chics
Reply
Old Jul 23, 2006 | 02:12 AM
  #85  
trunks's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2002
Posts: 192
Likes: 0
From: earth
haha!!! i've seen this sr20 and must admit that it's a pretty fast car. faster than most would think. it's true that this forum has changed a bit and people are quick to call b.s. but i can't blame them because there is a saying on here...........

THE 7 CAN'T LOSE!!!!!!!!!

Last edited by trunks; Jul 23, 2006 at 02:17 AM.
Reply
Old Jul 23, 2006 | 05:36 PM
  #86  
turbine's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2004
Posts: 906
Likes: 0
From: seattle wa
i use to kill my buddies 91 with an rb20det. with my 88 t2 all the mods with stock turbo and a factory tune
Reply
Old Jul 23, 2006 | 11:36 PM
  #87  
F.T.P. rotaryrocket's Avatar
forcefed 240
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 123
Likes: 0
From: morgantown, west virginia
Originally Posted by rt turbo
Il say this: my car running 14psi makes 359whp on stock non-seq. twins... This other guy's rx7 definatly was no where near. my rx7 runs properly. this guys s40 probably isnt making more than 340whp with that boost on that turbo. im not saying he didnt beat him, or making excuses for the other car. im simply saying, he would not have beatin my properly running FD on 14psi. furthermore, an rx7 with a single turbo upgrade to make this more comparable would eat up and spit out this guys 240.
that's fine if he won't beat your fd. i see where you are coming from. i was just saying why does everybody have to get butt hurt over the idea of an fd losing. you can make a silvia as fast as an fd with little effort. and if this guy is instigating as much as you say he is, then why is everybody sinking to such a childish level?
Reply
Old Jul 24, 2006 | 02:14 AM
  #88  
myfc3s's Avatar
That's what she said...
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jul 2005
Posts: 572
Likes: 0
From: Socal
Not taking any sides here. Can you PM me where you guys come out and play. I want to take my TII for a ride . Good kill bro! ever ran a TII?.
Reply
Old Jul 24, 2006 | 02:23 AM
  #89  
Bitchslapper's Avatar
Bitch betta have my money
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 16
Likes: 0
From: Sac Town
I think roll races are too. Useally its the guy who honks the horn pulls off first. I had a guy in a GT mustang try to race me on aroll and gunned it before I even knew we were racing, I caught up to him and honked 3 times ,let him accelerate first and killed him we came to a light and he chickened out.
Also FD's are known for all kinds of vaccum leaks. I remember before I had my hoses replaced I had about 8 hoses that were cracked or broken. At that time I lost to like an 89 corolla (it was an old lady at that), I just pretended like I wasn't racing. Yes that was a sad day for the 7's.
I'm gonna find that old lady and smoke the **** out of her.
Reply
Old Jul 24, 2006 | 05:30 PM
  #90  
socalrotor's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2003
Posts: 2,839
Likes: 0
From: southbay
Originally Posted by Bitchslapper
I'm gonna find that old lady and smoke the **** out of her.
How sad.
Reply
Old Jul 24, 2006 | 08:56 PM
  #91  
rotorsownyou7's Avatar
Slow RX-7
Tenured Member 10 Years
 
Joined: Sep 2004
Posts: 1,715
Likes: 0
From: Virginia
Originally Posted by Aristo
Well, to make the best comparison to a piston motor, based on the volume of air taken in by the motor per revolution of e-shaft , it would be more like 2.6L for a 1.3L rotary. I think most people on this forum use that value to compare to a piston motor.

Dude, don't start this **** again.
Reply
Old Jul 24, 2006 | 09:44 PM
  #92  
Henessey's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 615
Likes: 0
From: va
Reply
Old Jul 25, 2006 | 12:48 AM
  #93  
RotaryElite209's Avatar
Noob Status
Tenured Member 05 Years
 
Joined: May 2006
Posts: 10
Likes: 0
From: Stockton,CA
Nice kill.
Reply
Old Jul 26, 2006 | 10:35 PM
  #94  
21K95RX7's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2005
Posts: 528
Likes: 0
From: Balt. MD
Originally Posted by F.T.P. rotaryrocket
1 an sr20 tuned right with a gt2871r(a sexy *** turbo) will be more than a challenge for a modded fd. plus the two cars body weights are very similar.
2. if you guys did your homework that turbo plus a good tune will easily put down over 320whp with alot more room to make power.
3. you guys are getting all butt hurt over an internet forum? what did he say that was so bad. he wasn't talking smack on the FD until some members on here wanted to get into an internet pissing contest. even then he never said anything bad about the FD. yeah it's an rx-7 forum but everybody is welcome here.

I use to have a fc untill it bit the big one and now i have an s13 with a redtop. you guys really need to chill out. you just instigate and then when he responds to your antics he's the bad person? grow-up.
i agree with chinaman this guy comes on here only to antagonize and get a rise out of people...what if i went on a muslim forum and had the thread title "killed a muslim tonight" (no offense to muslims just a example) yes people and cars apples and oranges but this was meant to antagonize this community
Reply
Old Jul 27, 2006 | 08:37 AM
  #95  
Shinobi-X's Avatar
Sensory Experience
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 840
Likes: 1
From: MD
Its only effective when people respond to it...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aramir
New Member RX-7 Technical
24
Oct 18, 2015 02:39 AM
Smokeyfb33
Old School and Other Rotary
10
Oct 1, 2015 12:10 PM
Jmpabon93
New Member RX-7 Technical
1
Sep 30, 2015 04:57 PM
izzolaw
1st Gen General Discussion
2
Sep 27, 2015 08:33 PM




All times are GMT -5. The time now is 01:55 AM.