Yes it's an EX IMSA RX7 GTU tube frame
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's an EX IMSA RX7 GTU tube frame
Want to see my new baby !!!
Yes it's an EX IMSA RX7 GTU tube frame.
Now that a race car.
On the left clomum 7 up from the bottom:IMSA RX7 project (benny)
And yes those are air jecks.
http://www.realride.com/RX7-parting-out.html
benny
Yes it's an EX IMSA RX7 GTU tube frame.
Now that a race car.
On the left clomum 7 up from the bottom:IMSA RX7 project (benny)
And yes those are air jecks.
http://www.realride.com/RX7-parting-out.html
benny
#2
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Sorry wrong link, I have an other post.
Here it is.
http://images.realride.com/cgi-bin/imageFolio.cgi
Here it is.
http://images.realride.com/cgi-bin/imageFolio.cgi
Trending Topics
#8
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
the only real need is for a flat oil pan, I creating a external dry sump. so any think in that area, or may be a stainless header.
Thx
Benny
benoit@realride.com
Thx
Benny
benoit@realride.com
#10
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
The primary car ran IMSA from 91 to 94 couple of daytona 24. The sponsr was corona. My car was the back-up car and only did about 3 or 4 race still fresh!
Benny
Any part that U have for a dry sump engine
Benny
Any part that U have for a dry sump engine
#11
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for a front cover dry sump for 13B, for my IMSA GTU project, if I do not find I will buy the Mazdacomp one, so if any body has 1 let me know.
Thx
benoit@pennyweb.com
Thx
benoit@pennyweb.com
#12
Rotary Enthusiast
Join Date: Mar 2001
Location: Southern Cali
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Benny,
I think I remember that car. I saw it race at Del Mar with it's sister cars during the IMSA days. I might actually have a pic or two. Was the car wearing 2nd or 1st gen bodywork?
If I remember correctly, this car was not a factory race car.
-Bern
I think I remember that car. I saw it race at Del Mar with it's sister cars during the IMSA days. I might actually have a pic or two. Was the car wearing 2nd or 1st gen bodywork?
If I remember correctly, this car was not a factory race car.
-Bern
#13
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
you are on the money this is the 2sd car that ran at delmar.
I do not have any good photos and would love some.
It was the back up car and only ran a few rcaes. It's pretty clean and unused car.
benoit@realride.com
I do not have any good photos and would love some.
It was the back up car and only ran a few rcaes. It's pretty clean and unused car.
benoit@realride.com
#14
Senior Member
Join Date: Nov 2001
Location: Rochester NY
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Benny, good luck with the new car. Glad you finaly found something. Looks like a ton-o-fun. Where are you planning to race it? Did you know that the SCCA just allowed PPort 13b's in GT2?
#16
Full Member
Thread Starter
Join Date: Nov 2001
Location: california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately the SCCA will not accept this body in GT2. I check the track record at willow spring and the GTU is 6 second faster than the GT2 SCCA not bad !!
And yes the car was missing engine tranny and rear upright.
Thx
Ben
And yes the car was missing engine tranny and rear upright.
Thx
Ben
#17
Rotary Enthusiast
Join Date: Mar 2001
Location: Southern Cali
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by benny
you are on the money this is the 2sd car that ran at delmar.
I do not have any good photos and would love some.
It was the back up car and only ran a few rcaes. It's pretty clean and unused car.
benoit@realride.com
you are on the money this is the 2sd car that ran at delmar.
I do not have any good photos and would love some.
It was the back up car and only ran a few rcaes. It's pretty clean and unused car.
benoit@realride.com
Unfortunately, I did find any pics, but I did find information on the #88 car, as raced at Del Mar.
In 1989 and 1990, The Corna Light Beer # 88 car was raced by Mike Henderson, from El Cajon, Ca.
In 1991 The Beach Boys Racing / Corna Lite # 88 car was raced by Bob Franham, from Venice, Ca.
--on it's sister car, the #78 then #72 car:
In 1989 and 1990, The Corna Extra Beer # 78 car was raced by John Daley, from San Diego, Ca.
In 1991 The Beach Boys Racing / Corna Extra Beer # 72 car was raced by Gary Blehl, from Venice, Ca.
I hope this information helps some.
btw, and unfortunately, these privateers were overwhlemed by the Mazda (Rotary) MX-6, Nissan 240, and Dodge Dayotna, GTU factory efforts.
-Bern
Last edited by Bern; 01-13-04 at 03:30 PM.
#20
Rotary Enthusiast
Join Date: Mar 2001
Location: Southern Cali
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Benny. I'd like to see it again.
I've actually have met both you and Tim. I crew for the Mariah Motorsports FROG E-Prod team. I've spoken to you guys at Willow Springs several times.
I'm in North Hollywood, close to Tim.
PM with your # and we'll get it together.
-Berny
I've actually have met both you and Tim. I crew for the Mariah Motorsports FROG E-Prod team. I've spoken to you guys at Willow Springs several times.
I'm in North Hollywood, close to Tim.
PM with your # and we'll get it together.
-Berny
#21
Originally posted by benny
the only real need is for a flat oil pan, I creating a external dry sump. so any think in that area.
the only real need is for a flat oil pan, I creating a external dry sump. so any think in that area.
I'm looking for a front cover dry sump for 13B, for my IMSA GTU project, if I do not find I will buy the Mazdacomp one, so if any body has 1 let me know.