rollcage help..
#26
I'll blow it up real good
iTrader: (1)
Originally posted by GeTCrAzYKiD
gee, from reading your posts, im not sure what i should even go with anymore. And, ontop of that, i still have a full interior and i wish the keep it.
gee, from reading your posts, im not sure what i should even go with anymore. And, ontop of that, i still have a full interior and i wish the keep it.
#27
I'll blow it up real good
iTrader: (1)
Originally posted by Travis R
I agree.
There is actually an extenuating circumstance with the miatas. There is a double hump "style" bar that has raised some questions about this very topic. Some people believe that they have caused more injuries because they fold over onto the driver during a roll-over. They don't have any forward or rear bracing.
Be safe out there.
I agree.
There is actually an extenuating circumstance with the miatas. There is a double hump "style" bar that has raised some questions about this very topic. Some people believe that they have caused more injuries because they fold over onto the driver during a roll-over. They don't have any forward or rear bracing.
Be safe out there.
Last edited by RX-Heven; 03-22-03 at 01:02 PM.
#28
Zoom Zoom Boom
Thread Starter
Originally posted by RX-Heven
On that note, maybe a bolt in cage is all you need or want, especially if you want to keep the interior and it is not primarily a track car.
On that note, maybe a bolt in cage is all you need or want, especially if you want to keep the interior and it is not primarily a track car.
#31
Zoom Zoom Boom
Thread Starter
well its not finished yet..and thats what im expecting to run. no garuntee's..and that with slicks..but that sorta what im looking to find out too..
#32
I'll blow it up real good
iTrader: (1)
Last years rules state that 10 sec cars at a minimum require bolt in cages to have a 6 x 6 x 1/8 inch plate welded to the floor where the cage bolts to it to help try eliminate any punch through worries. The only reason I know this is GNX7 bought my cage and wanted to make sure it was all good for his 10 sec RX.
#34
Senior Member
Join Date: Nov 2001
Location: Vancouver BC
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
I have a question I plan on doing club solo1 days and I need a cage that meets SCCA specs.
The autopower cage meets SCCA specs but I find the rear mounting position of it to be very poorly designed, such that it mounts on to the rear tower bar.
The other cage which I prefer is the JEGS cage which has the mounts not on the rear towers but actually on the floor of the rear. But the problem with Jegs is that it doesn't state that it meets SCCA spec, instead it is meets NHRA as a drag racing use cage.
My question is can I use the Jegs for SCCA? The design is very similar but I don't know why it does not meet the specs.
Autopower:
http://www.ioportracing.com/Merchant...egory_Code=MDI
Jegs: http://www.jegs.com/cgi-bin/ncommerc...00&prmenbr=361
The autopower cage meets SCCA specs but I find the rear mounting position of it to be very poorly designed, such that it mounts on to the rear tower bar.
The other cage which I prefer is the JEGS cage which has the mounts not on the rear towers but actually on the floor of the rear. But the problem with Jegs is that it doesn't state that it meets SCCA spec, instead it is meets NHRA as a drag racing use cage.
My question is can I use the Jegs for SCCA? The design is very similar but I don't know why it does not meet the specs.
Autopower:
http://www.ioportracing.com/Merchant...egory_Code=MDI
Jegs: http://www.jegs.com/cgi-bin/ncommerc...00&prmenbr=361
Thread
Thread Starter
Forum
Replies
Last Post
vaughnc
2nd Generation Specific (1986-1992)
16
07-16-02 10:15 AM