Power FC what is the most common and more liked secondary injector size to run?
05-20-12, 09:17 AM
#1
what is the most common and more liked secondary injector size to run?
Kind of confusing there .. lol
I've been reading a bit on injectors since mine seem to be not enough , My idle is perfect I dont want to touch my primaries . I just want more fuel when I gun it . and I've been thinking of upgrading my injectors since I'm going lean at WOT
I have the stock twins , and apperantly I didn't port the waste gate enough since even at 20% its still over boosting .
so I'd like some injectors to fix this problem , and to have enough fuel for when I replace my stock twins with BNR's next year or so.
My friend suggested to get 2000cc injectors . but I'm honestly a novice tuner I dont know much about how to adjust the injectors
so I'm looking for something people use alot and all the calculations have been done so I can just copy paste .. LOL
local person in Miami , I spoke to about injectors that gave me a good deal was for the bosch EV14's he has them in different sizes .
and If possible what opinions do you guys have?
I've been reading a bit on injectors since mine seem to be not enough , My idle is perfect I dont want to touch my primaries . I just want more fuel when I gun it . and I've been thinking of upgrading my injectors since I'm going lean at WOT
I have the stock twins , and apperantly I didn't port the waste gate enough since even at 20% its still over boosting .
so I'd like some injectors to fix this problem , and to have enough fuel for when I replace my stock twins with BNR's next year or so.
My friend suggested to get 2000cc injectors . but I'm honestly a novice tuner I dont know much about how to adjust the injectors
so I'm looking for something people use alot and all the calculations have been done so I can just copy paste .. LOL
local person in Miami , I spoke to about injectors that gave me a good deal was for the bosch EV14's he has them in different sizes .
and If possible what opinions do you guys have?
05-20-12, 10:25 AM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,897
Likes: 0
Received 118 Likes
on
68 Posts
The stock Denso 550 primaries are good up to around 400 whp as long as your have larger secondaries like 1600/1680/2000.
The ratio of sizes is that the primaries be about 1/3 the size of the total needed.
550 + 1600 = 2150, 550/2150 = 25.6% My setup.
750 + 2000 = 2750, 750/2750 = 27.3%
The ratio of sizes is that the primaries be about 1/3 the size of the total needed.
550 + 1600 = 2150, 550/2150 = 25.6% My setup.
750 + 2000 = 2750, 750/2750 = 27.3%
05-20-12, 01:49 PM
#3
The stock Denso 550 primaries are good up to around 400 whp as long as your have larger secondaries like 1600/1680/2000.
The ratio of sizes is that the primaries be about 1/3 the size of the total needed.
550 + 1600 = 2150, 550/2150 = 25.6% My setup.
750 + 2000 = 2750, 750/2750 = 27.3%
The ratio of sizes is that the primaries be about 1/3 the size of the total needed.
550 + 1600 = 2150, 550/2150 = 25.6% My setup.
750 + 2000 = 2750, 750/2750 = 27.3%
thank you for your reply , I guess 2200 would be tomuch
so he has 1200's , and 1600 Low imp
are the original sidefeed secondaries low imp?
or if I went with the 1600's I'd need ot add a resistor?
hmm I think I'm going off Power FC specific topic here though lol
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
