Power FC Forum Apex Power FC Support and Questions.

Power FC Getting breakup

Thread Tools
 
Search this Thread
 
Old 07-26-10, 10:11 PM
  #1  
Senior Member

Thread Starter
iTrader: (10)
 
theo481's Avatar
 
Join Date: Aug 2005
Location: Hudson WI
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
Question Getting breakup

Hey,

I've got a log and a *.dat for you guys to check out...

Here are my mods:

3 inch turbo back, no cats, DP, MP, .69/.70 A/R's, 550cc/850cc, FMIC, running @ 11lb gate controlled....

Fist off, I would GREATLY appreciate it if someone could look at my *.dat and tell me how it looks for a base map, I feel the IGN map is f'ed up.

The problem is, that I am getting an ignition (I think) breakup at the top end, and it seems like it would be within the transitions, not really sure though.

Thanks again!

Theo

Too big to attach so here is a link to my logs and dat file.

http://www.4shared.com/file/2Q4mLcxK/logs.html
Old 07-27-10, 06:48 AM
  #2  
Rotary Specialists
RX7Club Vendor
iTrader: (11)
 
Banzai-Racing's Avatar
 
Join Date: Jan 2008
Location: Indiana
Posts: 4,826
Received 308 Likes on 180 Posts
You are not logging a wideband or EGT, so it is not much help.

I see that you are using the default fuel base and correction map. Not good with a full exhaust.

What does ".69/.70 A/R" supposed to represent in your mods list? Obviously it is your turbo somehow. Are you running a single turbo? You have the sequential turned off in your map so we have to assume that you are.

You are running a single turbo with a the stock fuel injectors and the default base map that is set up for twins with a cat converter on your car?

Your problem is that your car needs to be tuned, you are most likely detonating due to running overly lean.
Old 07-27-10, 10:18 AM
  #3  
Senior Member

Thread Starter
iTrader: (10)
 
theo481's Avatar
 
Join Date: Aug 2005
Location: Hudson WI
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Banzai-Racing
You are not logging a wideband or EGT, so it is not much help.

I see that you are using the default fuel base and correction map. Not good with a full exhaust.

What does ".69/.70 A/R" supposed to represent in your mods list? Obviously it is your turbo somehow. Are you running a single turbo? You have the sequential turned off in your map so we have to assume that you are.

You are running a single turbo with a the stock fuel injectors and the default base map that is set up for twins with a cat converter on your car?

Your problem is that your car needs to be tuned, you are most likely detonating due to running overly lean.
O.o.....

I am running a single turbo the .69 is the hot side and the .70 is the cold side. Does someone have a basemap for me :?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
yusoslo
Haltech Forum
21
04-30-08 10:00 AM
arghx
2nd Generation Specific (1986-1992)
7
07-20-06 09:29 PM
DCrosby
Single Turbo RX-7's
18
05-05-05 01:40 PM



Quick Reply: Power FC Getting breakup



All times are GMT -5. The time now is 09:15 PM.