Power FC Forum Apex Power FC Support and Questions.

Power FC FD No Start

Thread Tools
 
Search this Thread
 
Old 11-10-17, 10:15 PM
  #1  
Junior Member
Thread Starter
 
AfternoonMock's Avatar
 
Join Date: May 2016
Location: Missoula, Montana
Posts: 14
Received 1 Like on 1 Post
Red face FD No Start

Hello friends,

Quick exciting history about the car... I bought the car about a year ago. It ran good'ish, I drove it home over 650 miles without an issue. AFRs were reading high (14's at the lowest - 15.40'ish at the highest.) and I was experiencing some sputter/break up at higher RPMs.
I did pretty basic maintenance on the car, changed the oil, oil filter, fuel filter, spark plugs and coolant.
This is where it gets fun, I decided to try and attempt to add a bit more fuel across the map to see if the AFR's would come down a bit... annnnd the first thing I saw when I opened the FC Edit program was "Initialize Power-FC" annnnnnnnd I wiped the tune completely. Feelsbadman.jpg

I got a hold of a tuner and he recommended I get the fuel injectors cleaned and tested which I did. Got a new base map, everything is looking good, got the injectors back in without any leaks and now I'm not able to turn over the car.
It cranks good, I smell fuel, tested for spark with good results. Bought a new battery. Thought I probably flooded it a few times, so I did the de-flooding procedure, bought even more new plugs... no luck at all.

Some details about the car: Large street port, single turbo GT35R, 800cc primary / 1600cc secondary injectors, front mounted inter-cooler, full exhaust.
It's setup with the Apexi Power FC w/ the datalogit. Running 7's leading, 9's trailing. I've quadruple checked all the work I've done, I don't believe I'm missing a ground somewhere, etc.
I'll attach a log of me trying to crank over the car, perhaps that will help reveal something. I'm completely stumped.

Any help is greatly appreciated!
Thanks in advance
Attached Files
File Type: txt
Log.txt (90.8 KB, 69 views)
Old 11-11-17, 02:07 AM
  #2  
Retired Moderator, RIP

iTrader: (142)
 
misterstyx69's Avatar
 
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes on 114 Posts
I copied this thread to the Power FC Section in case you could not access it.
You may be able to get better answers there.Good Luck.
Old 11-20-17, 04:21 PM
  #3  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
You need to post the current map on the PFC!

Weird data:

Water Temp = -1 C
Air Temp = 2 C
Fuel Temp = 175 C, so far off the other two!!!!!!!!!!!!!!!!
Old 11-20-17, 06:11 PM
  #4  
Junior Member
Thread Starter
 
AfternoonMock's Avatar
 
Join Date: May 2016
Location: Missoula, Montana
Posts: 14
Received 1 Like on 1 Post
Hey bud,

I posted the current map I was running on the other thread:
https://www.rx7club.com/new-member-r.../#post12233606

That is very odd. /shrug
Old 11-20-17, 06:14 PM
  #5  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
Originally Posted by AfternoonMock
Hey bud,

I posted the current map I was running on the other thread:
https://www.rx7club.com/new-member-r.../#post12233606

That is very odd. /shrug
Load the map so I can use the DATALOGIT software to open it. Not the pictures of the map!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NCross
Old School and Other Rotary
4
01-12-17 12:28 PM
purple82
1st Generation Specific (1979-1985)
2
09-26-16 09:38 AM
Somibue
New Member RX-7 Technical
6
09-23-16 10:03 PM
stever
3rd Gen General Discussion
6
09-20-16 07:46 PM
eslai
New Member RX-7 Technical
5
09-16-16 10:05 PM



Quick Reply: Power FC FD No Start



All times are GMT -5. The time now is 08:19 AM.