FD No Start
 

Hello friends,

Quick exciting history about the car... I bought the car about a year ago. It ran good'ish, I drove it home over 650 miles without an issue. AFRs were reading high (14's at the lowest - 15.40'ish at the highest.) and I was experiencing some sputter/break up at higher RPMs.
I did pretty basic maintenance on the car, changed the oil, oil filter, fuel filter, spark plugs and coolant.
This is where it gets fun, I decided to try and attempt to add a bit more fuel across the map to see if the AFR's would come down a bit... annnnd the first thing I saw when I opened the FC Edit program was "Initialize Power-FC" annnnnnnnd I wiped the tune completely. Feelsbadman.jpg

I got a hold of a tuner and he recommended I get the fuel injectors cleaned and tested which I did. Got a new base map, everything is looking good, got the injectors back in without any leaks and now I'm not able to turn over the car.
It cranks good, I smell fuel, tested for spark with good results. Bought a new battery. Thought I probably flooded it a few times, so I did the de-flooding procedure, bought even more new plugs... no luck at all.

Some details about the car: Large street port, single turbo GT35R, 800cc primary / 1600cc secondary injectors, front mounted inter-cooler, full exhaust.
It's setup with the Apexi Power FC w/ the datalogit. Running 7's leading, 9's trailing. I've quadruple checked all the work I've done, I don't believe I'm missing a ground somewhere, etc.
I'll attach a log of me trying to crank over the car, perhaps that will help reveal something. I'm completely stumped. :(

Any help is greatly appreciated!
Thanks in advance:)

I copied this thread to the Power FC Section in case you could not access it.
You may be able to get better answers there.Good Luck.

You need to post the current map on the PFC!

Weird data:

Water Temp = -1 C
Air Temp = 2 C
Fuel Temp = 175 C, so far off the other two!!!!!!!!!!!!!!!!

Hey bud,

I posted the current map I was running on the other thread:
https://www.rx7club.com/new-member-r.../#post12233606

That is very odd. /shrug

Load the map so I can use the DATALOGIT software to open it. Not the pictures of the map!