REPU REDO (REW T66 platform)
Thread Starter
Joined: Jun 2004
Posts: 1,019
Likes: 20
From: Little Rock, Arkansas
Made some freeway pulls after the dyno. Tires and road was cold so I was not able to get traction so it was not pulling as hard as it should, but still feels good spinning or not!
Joined: Apr 2006
Posts: 3,740
Likes: 6
From: Las Vegas, NV
Been watching all these vids on the FB repu forum lol. I remember you back in the first gen section as well with the blue one. Still got it? Great work on this killer REPU!
Thread Starter
Joined: Jun 2004
Posts: 1,019
Likes: 20
From: Little Rock, Arkansas
Thanks for the complements!
Twinkletoes, unfortunately a elderly man pulled directly out in front of me while I was doing around 30mph. The car climbed his front wheel then rode on two wheels until I yanked the wheel setting it down pretty hard. ALLSTATE INS. was wanting to chop off the front cap from the firewall and weld one from another car on.... I did not understand how they could legally do this to a unibody car, in the end I just took the cash that I could get and then stripped all the parts off of the car. (If you ever get into a wreck with some one that has the same insurance as you, get a lawyer.....don't think that they will do the right thing in this situation) I could not believe how the ALLSTATE INS. people acted and talked to me considering I had been a client for many years. Lesson learned.
Twinkletoes, unfortunately a elderly man pulled directly out in front of me while I was doing around 30mph. The car climbed his front wheel then rode on two wheels until I yanked the wheel setting it down pretty hard. ALLSTATE INS. was wanting to chop off the front cap from the firewall and weld one from another car on.... I did not understand how they could legally do this to a unibody car, in the end I just took the cash that I could get and then stripped all the parts off of the car. (If you ever get into a wreck with some one that has the same insurance as you, get a lawyer.....don't think that they will do the right thing in this situation) I could not believe how the ALLSTATE INS. people acted and talked to me considering I had been a client for many years. Lesson learned.
Joined: Apr 2006
Posts: 3,740
Likes: 6
From: Las Vegas, NV
Thanks for the complements!
Twinkletoes, unfortunately a elderly man pulled directly out in front of me while I was doing around 30mph. The car climbed his front wheel then rode on two wheels until I yanked the wheel setting it down pretty hard. ALLSTATE INS. was wanting to chop off the front cap from the firewall and weld one from another car on.... I did not understand how they could legally do this to a unibody car, in the end I just took the cash that I could get and then stripped all the parts off of the car. (If you ever get into a wreck with some one that has the same insurance as you, get a lawyer.....don't think that they will do the right thing in this situation) I could not believe how the ALLSTATE INS. people acted and talked to me considering I had been a client for many years. Lesson learned.
Twinkletoes, unfortunately a elderly man pulled directly out in front of me while I was doing around 30mph. The car climbed his front wheel then rode on two wheels until I yanked the wheel setting it down pretty hard. ALLSTATE INS. was wanting to chop off the front cap from the firewall and weld one from another car on.... I did not understand how they could legally do this to a unibody car, in the end I just took the cash that I could get and then stripped all the parts off of the car. (If you ever get into a wreck with some one that has the same insurance as you, get a lawyer.....don't think that they will do the right thing in this situation) I could not believe how the ALLSTATE INS. people acted and talked to me considering I had been a client for many years. Lesson learned.
Thread Starter
Joined: Jun 2004
Posts: 1,019
Likes: 20
From: Little Rock, Arkansas
A lot of wheels fit the repu that are made for the new Toyota trucks/FJ's along with Nissan and more, my wheels are 17x9 and 17x8 with 0 offset (5"backspacing and 4.5" backspacing). I picked these up from Discount Tire and was one of there in house brands.
Thread Starter
Joined: Jun 2004
Posts: 1,019
Likes: 20
From: Little Rock, Arkansas
Thanks, its fun in its own way vs. the FD.... Never dynoed my FD, but I was running 28psi through a T88 on pump gas with a 8,700rpm limit. It was fast a crap, but the old school is such a sleeper/death trap that its a little different feeling behind the wheel, the one nice thing is that the cops don't even look at the REPU..... The FD, they would spot a mile away. Rx2's are nice and small, with that much power it should be a blast.
