Hello everyone. I have an SE which I just put a Turbo ll engine in it. It's completely ported out, half bridged, & ALL FD internals. I'm currently running a 650 carb from my old engine on it, to just break it in. I want to get at least 500 HP out of it. What size turbo should I run to do it comfortably w/o having excessive psi? Tnhx.

 

Bump

 

I have a 76 trim turbonetics single turbo that works well on my car

 

That sounds about right. Would u mind telling me how much HP ur making & at what psi?

 

http://www.atpturbo.com/mm5/merchant...egory_Code=GRT...82a/r...

 

well get a s400 if you want but are you running a ems?

 

Thnx

 

I'm planning on using a Microtec. Sorry I dont have much info but I juz got done wit d rebuilt $$$$$. So I'm juz starting to save for the next step. That's why I'm looking for ppls opinions b4 i juz jump into buying anything.

 

I wNna say it's at 14psi, 308hp to the wheels, turbo is capable of much more.

 

That's actually not bad. I've been lookin around & it seems a lot of ppl are using the GT35R so I'm leaning towards it. It must be a good choice. I'm looking at 258hp right now w/o turbo. It's ready for turbo so its running on low comp rotors.

 

GT35R is definitely a good choice. not too much lag at all either.

 

If you want good information on turbos... Try these links:

Single Turbo FAQ

^ After reading that. If you still have questions, post them here-> Single Turbo RX-7's

 

You can always add 750 cc fuel injectors if the turbo power isn't as powerful as you were hoping for.

 

Thnx for all the advise. Very helpful.

 

http://www.precisionturbo.net/Street...ss/450-600HP/1
^^check some of those out^^

 

i like the s366 or the s400 or a Garrett gt40r or gt42r with a microtech, fuel mods and with some other mods

 

what would be better to buy a mottor from japan with a turbo already on it or rebuiling my 12a and putting a turbo on it? i have a 1985 gsl 12a but was thinking of buying a 13b for more HP.

 

Thanks for that link, newbie so that's really useful info.