New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Starter wiring, new owner needing help.

Thread Tools
 
Search this Thread
 
Old 03-28-18, 12:34 PM
  #1  
Junior Member
Thread Starter
 
Theodore W's Avatar
 
Join Date: Mar 2018
Location: Wisconsin
Posts: 6
Received 0 Likes on 0 Posts
Starter wiring, new owner needing help.

About a month ago i purchased an 84' rx7 that sat for a year. Recently I baught a new battery for it and hooked it up. Now when I put the key in dash lights up, when I turn the key forward to send power to the starter nothing happens, no lights no sounds. When I turn the key back I no longer have dash lights (as if battery wasn't connected). Disconnect battery and reconnect still nothing (no dash lights). Checked fuses, all good. Checked battery, still 12.8v. A friend suggested that a relay is stuck or bad.

Before I start ripping stuff apart does anyone have suggestions? If it is a relay, what one and where can I find it? I couldn't find many helpful diagrams online.
I'm new to the rx7 club as well was car wiring, so every detail/picture helps a lot. thank you very much for all your help.
Old 03-29-18, 09:27 PM
  #2  
Full Member
 
broccolini's Avatar
 
Join Date: Feb 2018
Location: Washington
Posts: 130
Received 3 Likes on 3 Posts
You can download the wiring diagram for your car here. Have you checked the fusible links?
Old 03-30-18, 01:15 PM
  #3  
Junior Member
Thread Starter
 
Theodore W's Avatar
 
Join Date: Mar 2018
Location: Wisconsin
Posts: 6
Received 0 Likes on 0 Posts
I Have not, only the fuses and battery. Thanks a ton for the link, this will make my experience more enjoyable.
Old 03-31-18, 02:53 AM
  #4  
Junior Member
iTrader: (1)
 
Mark_Dorman's Avatar
 
Join Date: Mar 2018
Location: Santa Ana, CA
Posts: 11
Received 0 Likes on 0 Posts
Starter could be shorting the system or just a bad relay. You can easily test it by jumping the wiring for the relay and see if it start up. Just pull the relay and use a wire to jump the connection the relay would normally do.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
deejaydelsol
New Member RX-7 Technical
11
07-21-12 01:55 PM
FDracing
New Member RX-7 Technical
6
04-02-11 02:15 PM
pantsmassive2
Introduce yourself
8
06-17-09 01:29 PM
SURFA2K
3rd Generation Specific (1993-2002)
3
11-14-05 06:01 AM



Quick Reply: Starter wiring, new owner needing help.



All times are GMT -5. The time now is 05:00 PM.