Rx7 fd apexi fc ecu restarting while I知 driving
12-24-17, 03:08 PM
#1
Junior Member
Thread Starter
Rx7 fd apexi fc ecu restarting while I知 driving
Hi guys slight problem with my fd. Exhaust heat light comes on now and then while I知 driving this causes the car to stutter for a brief second and sometimes switch off all together. While this happens the Apexi Fc hand held restarts or reboots on me ( screen turns off then back on) .Can anyone help me please. Thanks
12-26-17, 04:15 AM
#3
Junior Member
Thread Starter
Brief Mods on the car include
blitz fmic
koyo rad
aem uprated coil pack
border burnout full 3” system
Runnning on non sequential twin turbos
fuel pressure regulator
455lph fuel pump
infini y pipes
blitz super sonic air filter
ive checked the connection from the lcd screen to the ecu and it’s fine
ive also checked the wires plugging into the ecu and they all seem to be secure
can’t really understand why it throws the exhaust heat light out then Ecu reboots it’s self
Anymore info needed on the car please ask
blitz fmic
koyo rad
aem uprated coil pack
border burnout full 3” system
Runnning on non sequential twin turbos
fuel pressure regulator
455lph fuel pump
infini y pipes
blitz super sonic air filter
ive checked the connection from the lcd screen to the ecu and it’s fine
ive also checked the wires plugging into the ecu and they all seem to be secure
can’t really understand why it throws the exhaust heat light out then Ecu reboots it’s self
Anymore info needed on the car please ask
12-26-17, 05:45 AM
#4
Go to the sensor screen on the commander and see what is shaded.
Those “uprated” coils might be something to check. I was just reading how a bad leading coil or improperly routed leads can cause stupid high EGTs which could explain your warning light...and possibly the stalling.
12-29-17, 12:24 PM
#5
Junior Member
Thread Starter
I’ve heard that the exhaust heat light is used as a check engine light when running a apexi fc.
When I get in to my car first thing in the morning and turn the ignition on the head unit turns on and the lights and windows work fine. After like a minute or so while the ignition is on a single click noise is msde from the engine bay then the apexi fc screen turns on. I’m possibly thinking a bad relay of some sort?
When I get in to my car first thing in the morning and turn the ignition on the head unit turns on and the lights and windows work fine. After like a minute or so while the ignition is on a single click noise is msde from the engine bay then the apexi fc screen turns on. I’m possibly thinking a bad relay of some sort?
Trending Topics
01-02-18, 06:40 AM
#8
rotorhole
you'll have to monitor the voltage from the main relay to the ECU to see if its dropping much below 12v, this might require an external datalogger. i don't recall if the ECU itself has an option to check the input voltage, even if it does you need the datalogit.
01-06-18, 05:02 AM
#9
if the commander is unplugged or plugged in while the car is running, it can cause the issue youre having. check the connection at the power fc and make sure its tight and not somehow loose and the vibrations of the car are causing it to intermittently not work.
04-10-18, 12:23 PM
#12
Junior Member
Have you tried getting a friend or someone that has another power FC and see if that helps. Your PfC might be on its way out. That’s one way to make sure you can rule out a bad PFC.
The following users liked this post:
MontegoRx7FD (04-10-18)
Thread
Thread Starter
Forum
Replies
Last Post
thebiggster
New Member RX-7 Technical
23
05-12-14 07:57 PM