Could someone help me with the power steering wiring, I have all the parts "PS rack, computer, lines, pump mounted ect.", however I don't have a diagram of the wiring for the PS. I have a 86 fcs3 sport it has the plug under the dash on the drivers side for the power steering control unit, also there is a place in the fuse box for a power steering fuse. But I don't know where the power steering pump is wired into the car at I don't see any plugs if i have to make a custom harness and relocate the PS computer that's fine.

 

some one has to have done rewiring to there 7?
some diagrams or schematics would be really helpful.

 

any one please help?

BUMP

 

Bump

 

I am going to convert a manual rack car over to PS myself. If I figure it out I will let you know.

 

I'm also doing this...but I'm stuck on wiring.

 

I ended up blocking off the 3rd port on the rack and picked up a non electrical power steering pump and just used two of lines, it's a bit more sensitive at high speeds but keep the stock steering wheel or get a larger one, because of the different ratio of the power steering rack vs. the manual rack.

 

I actually wasn't stuck on it much. The harness for the pump is right next to the battery. White connectors

 

humm yah my 86 sport did not have one so I improvised