really need the pin outs for these connectors, the car is an s4 and i am in the process of swapping an s5 motor,wiring harness and ecu, but i dont have the body harness so i made the plug for the ecu but i bought the wiring harness already re-wired for the swap and i think it might be wrong (car wont start) PLEASE HELP!!!

 

https://docs.google.com/file/d/0Bzy-...hl=en_US&pli=1

 

cant get the link you posted to work, any suggestions?

 

Works just fine for me. How about one more time for the Gipper.

 

i have tried to open it in internet explorer and Firefox, i will either get a blank screen or a problem loading page screen

 

www.foxed.ca
it has everything you need.

 

Thank you, and you wouldn't happen to know what these connectors are for or what they are called do you?

 

Depends on whether you are using a turbo or non-turbo but if it's a turbo then the plugs connected to the ECU are BI-03, BI-10 and BI-23. The connectors between the two harnesses would be X-10, X11 etc and these connector diagrams are located towards the very bottom of the S5 wiring diagram.

 

Sounds like work. I think the haynes manual has some.