New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Car trouble

Thread Tools
 
Search this Thread
 
Old Aug 7, 2009 | 07:27 AM
  #1  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN Car trouble

I have a 1989 Mazda RX-7 convertible, it chokes out
when I drive it on the road, the engine light comes on and
then it runs awful
Reply
Old Aug 7, 2009 | 08:56 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Pull the trouble codes. I'm betting the metering oil pump has failed and the car has defaulted to limp mode.
Reply
Old Aug 8, 2009 | 12:25 AM
  #3  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN car trouble

ok thanks! but also it does not do it on jack stands, only on the road,
I will get an obd 1 scanner and read the code. Thanks again
Reply
Old Aug 8, 2009 | 12:28 AM
  #4  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
ok thanks, but it only does it on the road not on jack stands.
I will get an obd one scanner and read it thanks again!!
Reply
Old Aug 8, 2009 | 11:06 PM
  #5  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN

Originally Posted by Aaron Cake
Pull the trouble codes. I'm betting the metering oil pump has failed and the car has defaulted to limp mode.
can I just run 2 cycle in the gas and unplug it to see if that works, or will the ecm still shut me down.
Reply
Old Aug 9, 2009 | 07:16 AM
  #6  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
since It is an S5,NO..you cannot Disconnect the Oil Metering Pump.
It NEEDS to be connected and the ECU needs to SEE it Connected,(EVEN IF you decide to Premix.If you decide to Premix you have to Take the OMP out and Dangle it Somewhere in the engine bay..That or Go Standalone Computer.)
you need to find a GOOD OMP...Post a Wanting to BUY in the Sec Gen FOR sale Section and also the "regional" For Sale sections of the Forum,Someone May have one.and it wil save you from Buying from the "stealership"..Good Luck.,sTYX.
Reply
Old Aug 9, 2009 | 08:19 AM
  #7  
Banzai-Racing's Avatar
Rotary Specialists
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2008
Posts: 4,868
Likes: 344
From: Indiana
You don't pull the codes with a scanner, here is a how-to along with the codes and what they mean http://www.banzai-racing.com/FD_S5_error_codes.htm
Reply
Old Aug 9, 2009 | 10:34 AM
  #8  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Originally Posted by Paul wayne Parker
ok thanks! but also it does not do it on jack stands, only on the road,
I will get an obd 1 scanner and read the code. Thanks again
Not sure what this has to do with jack stands, but OK.

An ODB1 scanner won't help you.

Originally Posted by Paul wayne Parker
can I just run 2 cycle in the gas and unplug it to see if that works, or will the ecm still shut me down.
No. The ECU must see a functional metering oil pump or it will go into limp mode.
Reply
Old Aug 10, 2009 | 07:20 AM
  #9  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN

Originally Posted by Aaron Cake
Not sure what this has to do with jack stands, but OK.

An ODB1 scanner won't help you.



No. The ECU must see a functional metering oil pump or it will go into limp mode.
ik thanks, the jackstand thing if I put it on the stands I can go 1st 2nd 3rd 4th 5th up in 100 plus mph but once it hist the pavement we have problems.
Reply
Old Aug 10, 2009 | 07:21 AM
  #10  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN

Originally Posted by Banzai-Racing
You don't pull the codes with a scanner, here is a how-to along with the codes and what they mean http://www.banzai-racing.com/FD_S5_error_codes.htm
thanks
Reply
Old Aug 10, 2009 | 07:22 AM
  #11  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
IN

Originally Posted by misterstyx69
since It is an S5,NO..you cannot Disconnect the Oil Metering Pump.
It NEEDS to be connected and the ECU needs to SEE it Connected,(EVEN IF you decide to Premix.If you decide to Premix you have to Take the OMP out and Dangle it Somewhere in the engine bay..That or Go Standalone Computer.)
you need to find a GOOD OMP...Post a Wanting to BUY in the Sec Gen FOR sale Section and also the "regional" For Sale sections of the Forum,Someone May have one.and it wil save you from Buying from the "stealership"..Good Luck.,sTYX.
thanks!!
Reply
Old Aug 10, 2009 | 01:13 PM
  #12  
DriftBizzle's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2009
Posts: 7
Likes: 0
From: South Bay
Its probobly LimpMode.. which means it has an OMP failure.... Replace the Oil Metering pump... Limpmode BE gone! =)
Reply
Old Aug 10, 2009 | 01:14 PM
  #13  
DriftBizzle's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2009
Posts: 7
Likes: 0
From: South Bay
I say this because same thing happened to my friend.. Replaced OMP.. Car runs Beautiful now..
Reply
Old Aug 12, 2009 | 07:24 AM
  #14  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
Originally Posted by DriftBizzle
I say this because same thing happened to my friend.. Replaced OMP.. Car runs Beautiful now..
thanks everybody let you know when I check these things out and get them replaced
Reply
Old Oct 5, 2009 | 09:19 PM
  #15  
450riden's Avatar
Junior Member
 
Joined: Sep 2009
Posts: 25
Likes: 0
From: Buffalo
A failed OMP on a S5 will more than likely take the ecu with it
Reply
Old Oct 7, 2009 | 07:01 AM
  #16  
Paul wayne Parker's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 13
Likes: 0
From: Indiana
so I have herd just saving money for the parts for it now thanks yo
Reply
Old Oct 8, 2009 | 01:27 AM
  #17  
w.sen's Avatar
In a Bucket
iTrader: (8)
 
Joined: Jun 2009
Posts: 468
Likes: 0
From: ocala, florida
Does an s4 omp controled by the ecu?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
5
Aug 17, 2015 12:59 PM
Junkee
New Member RX-7 Technical
2
Aug 15, 2015 01:57 PM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 09:29 PM.