New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

Add coolant indicator

Thread Tools
 
Search this Thread
 
Old 10-02-23, 07:08 PM
  #1  
Junior Member
Thread Starter
 
forrest280z's Avatar
 
Join Date: Sep 2023
Location: New Hampshire
Posts: 8
Received 3 Likes on 3 Posts
Add coolant indicator

The add coolant indicator appears to be partially lit on my temp gauge on the 1993 FD I just acquired. I am guessing this is just light contamination from the backlight? Engine is cool, running below the middle of the gauge. Coolant dipstick says 90% full.

I just wanted to check to see if this is a common issue or maybe just a flaw with my gauge. Thanks.
Old 10-14-23, 03:57 PM
  #2  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,819
Received 307 Likes on 268 Posts
welcome to the board.

here's a link to the FSM: Foxed.ca

maybe start by disconnecting the sensor and seeing if it goes away.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vr4much
3rd Generation Specific (1993-2002)
4
04-21-12 08:12 PM
DDagman
3rd Generation Specific (1993-2002)
24
08-20-08 04:22 PM
SumTinWong
3rd Generation Specific (1993-2002)
3
03-02-08 11:14 PM
DBOGGSRX7
1st Generation Specific (1979-1985)
5
01-07-03 06:25 PM
efinirx7
General Rotary Tech Support
1
11-29-01 01:58 PM



Quick Reply: Add coolant indicator



All times are GMT -5. The time now is 05:20 PM.