New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

99 fd staring problem.

Old 03-29-14, 02:43 PM
  #1  
Junior Member
Thread Starter
 
RandomDan's Avatar
 
Join Date: Mar 2014
Location: UK
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
99 fd staring problem.

Over the last week or so my FD as developed an issue when starting up.
Pretty much every time i start it up first thing in the morning i takes a little while to kick in.
It started off a couple of turn overs and got longer and longer till it gets to the point i think its not going to.

My car is a 99 typeR with no engine mods other than a BOV.

Iv removed the UIM to check the coils and they seem to be fine if my understanding of the voltmeter is right!

I did however find this while i had it all off.
One of the my check valves leading to the pressure chamber is broken!



Would this be causing it?

A video.

Old 03-30-14, 11:50 AM
  #2  
Junior Member
Thread Starter
 
RandomDan's Avatar
 
Join Date: Mar 2014
Location: UK
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Iv checked the coils today and they seemed to be in tolerance resistances wise

Are the coils in the same position on the mounting bracket in a 99 or have they been moved?
I mention this as all the pictures iv seen show the leading coild in the middle but mine was on the right.
Old 04-05-14, 07:40 AM
  #3  
Junior Member
Thread Starter
 
RandomDan's Avatar
 
Join Date: Mar 2014
Location: UK
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Iv checked the precontrol and waste gate solenoids today (the green pair away from the main box in my case)

I appear to have a stuck or sever leaking precontrol solenoid.
When pressure or vacuum is applied it offers no resistance.
The waste gate solenoid seems fine.
Would this be causing my problem?

I used this info to perform a basic test with a syringe.

https://www.rx7club.com/3rd-generati...-stuff-802060/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NotMrButts
1st Generation Specific (1979-1985)
25
02-10-18 06:36 PM
sinistersam
New Member RX-7 Technical
5
09-13-15 07:17 PM
JGLawson
General Rotary Tech Support
4
09-13-15 03:23 PM
vmerino
2nd Generation Specific (1986-1992)
0
09-05-15 11:26 AM


Thread Tools
Search this Thread
Quick Reply: 99 fd staring problem.



All times are GMT -5. The time now is 04:13 PM.