RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   99 fd staring problem. (https://www.rx7club.com/new-member-rx-7-technical-256/99-fd-staring-problem-1060478/)

RandomDan 03-29-14 02:43 PM

99 fd staring problem.
 
Over the last week or so my FD as developed an issue when starting up.
Pretty much every time i start it up first thing in the morning i takes a little while to kick in.
It started off a couple of turn overs and got longer and longer till it gets to the point i think its not going to.

My car is a 99 typeR with no engine mods other than a BOV.

Iv removed the UIM to check the coils and they seem to be fine if my understanding of the voltmeter is right!

I did however find this while i had it all off.
One of the my check valves leading to the pressure chamber is broken!

http://i147.photobucket.com/albums/r...3-29114921.jpg

Would this be causing it?

A video.


RandomDan 03-30-14 11:50 AM

Iv checked the coils today and they seemed to be in tolerance resistances wise

Are the coils in the same position on the mounting bracket in a 99 or have they been moved?
I mention this as all the pictures iv seen show the leading coild in the middle but mine was on the right.

RandomDan 04-05-14 07:40 AM

Iv checked the precontrol and waste gate solenoids today (the green pair away from the main box in my case)

I appear to have a stuck or sever leaking precontrol solenoid.
When pressure or vacuum is applied it offers no resistance.
The waste gate solenoid seems fine.
Would this be causing my problem?

I used this info to perform a basic test with a syringe.

https://www.rx7club.com/3rd-generati...-stuff-802060/


All times are GMT -5. The time now is 02:17 AM.


© 2024 MH Sub I, LLC dba Internet Brands