Maryland guys!
That one is also sexual
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jun 2004
Location: Columbia, MD
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
jason. did you measure the entire cabinet or the screen itself?
the opening is 26.5"x26.5" if that still doesnt work, Anyone else wanna buy a wood entertainment center for $100? can provide pics.
the opening is 26.5"x26.5" if that still doesnt work, Anyone else wanna buy a wood entertainment center for $100? can provide pics.
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CokeRx7
I was just thinkin of gettin mazda3club.com decal. and a Zoom-Zoom one..
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Always Coca-Cola
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: May 2004
Location: DMV
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
The tribal stuff.. assured you that it was me.. and my 7 looked pretty good with it.. :-D
But the 3 is only getting tints (I feel naked w/o them) and Rims (To distinguish mine from everyone elses) ..
NOTE: (a meet that stared in the rx8club all are welcome piston and non.. )
Ok here’s the info for the meet on 1/13 (saturday) for those interested in coming out. It’s at Damon’s Grill in lovely Crofton, MD in the Waugh Chapel shopping center. Also attached to this post is the menu for Damon’s. I think anyone who has been to Damon's could agree that it’s not too expensive and the food is damn good. Also one other bonus, this place is open until 1AM, just an FYI.
Here’s the address And directions:
2406 Brandermill Blvd.,
Gambrills (Crofton), MD 21054
Directions: Estimate 30+ Miles
From DC / NoVA
Merge onto I-395 N via the ramp on the LEFT toward I-295.
1: Keep LEFT to take I-295 S.
2: Keep LEFT to take SOUTHEAST FWY toward PENNSYLVANIA AVENUE.
3: Merge onto PENNSYLVANIA AVE SE.
4: Turn SLIGHT LEFT onto FAIRLAWN AVE SE.
5: Merge onto DC-295 N (Crossing into MARYLAND).
6: Merge onto US-50 E toward ANNAPOLIS / RICHMOND.
7: Take the US-301 / MD-3 exit- EXIT 13A-B-C- toward RICHMOND / CROFTON.
8: Merge onto MD-3 N / N CRAIN HWY via EXIT 13B on the LEFT toward CROFTON.
9: Turn LEFT onto MAIN CHAPEL WAY.
10: Turn LEFT onto BRANDERMILL BLVD.
11: End at 2406 Brandermill Blvd
Gambrills, MD 21054-1649, US
As an alternate depending where you are in VA, you can take the beltway around towards the Wilson bridge and hop on MD Rt 50 towards Annapolis (exit 19) OR Take the beltway around across the American Legion Bridge (towards 270 / Rockville) to exit MD Rt 50 (exit 19)
From Baltimore: Estimate 20 -25 Miles
1.) Take MD-295 S. and continue to follow MD-295 S.
2.) Merge onto I-695 E / BALTIMORE BELTWAY OUTER LOOP toward KEY BRIDGE / GLEN BURNIE.
3.) Merge onto I-97 S / MD-3 S via EXIT 4 on the LEFT toward ANNAPOLIS / BAY BRIDGE.
4.) Merge onto MD-3 S / CRAIN HWY via EXIT 7 toward BOWIE / ODENTON.
5.) Turn RIGHT onto CHAPEL LAKE DR.
6.) Turn RIGHT onto BRANDERMILL BLVD.
7.) End at 2406 Brandermill Blvd
Gambrills, MD 21054-1649, US
Who ever is in, speak up!
But the 3 is only getting tints (I feel naked w/o them) and Rims (To distinguish mine from everyone elses) ..
NOTE: (a meet that stared in the rx8club all are welcome piston and non.. )
Ok here’s the info for the meet on 1/13 (saturday) for those interested in coming out. It’s at Damon’s Grill in lovely Crofton, MD in the Waugh Chapel shopping center. Also attached to this post is the menu for Damon’s. I think anyone who has been to Damon's could agree that it’s not too expensive and the food is damn good. Also one other bonus, this place is open until 1AM, just an FYI.
Here’s the address And directions:
2406 Brandermill Blvd.,
Gambrills (Crofton), MD 21054
Directions: Estimate 30+ Miles
From DC / NoVA
Merge onto I-395 N via the ramp on the LEFT toward I-295.
1: Keep LEFT to take I-295 S.
2: Keep LEFT to take SOUTHEAST FWY toward PENNSYLVANIA AVENUE.
3: Merge onto PENNSYLVANIA AVE SE.
4: Turn SLIGHT LEFT onto FAIRLAWN AVE SE.
5: Merge onto DC-295 N (Crossing into MARYLAND).
6: Merge onto US-50 E toward ANNAPOLIS / RICHMOND.
7: Take the US-301 / MD-3 exit- EXIT 13A-B-C- toward RICHMOND / CROFTON.
8: Merge onto MD-3 N / N CRAIN HWY via EXIT 13B on the LEFT toward CROFTON.
9: Turn LEFT onto MAIN CHAPEL WAY.
10: Turn LEFT onto BRANDERMILL BLVD.
11: End at 2406 Brandermill Blvd
Gambrills, MD 21054-1649, US
As an alternate depending where you are in VA, you can take the beltway around towards the Wilson bridge and hop on MD Rt 50 towards Annapolis (exit 19) OR Take the beltway around across the American Legion Bridge (towards 270 / Rockville) to exit MD Rt 50 (exit 19)
From Baltimore: Estimate 20 -25 Miles
1.) Take MD-295 S. and continue to follow MD-295 S.
2.) Merge onto I-695 E / BALTIMORE BELTWAY OUTER LOOP toward KEY BRIDGE / GLEN BURNIE.
3.) Merge onto I-97 S / MD-3 S via EXIT 4 on the LEFT toward ANNAPOLIS / BAY BRIDGE.
4.) Merge onto MD-3 S / CRAIN HWY via EXIT 7 toward BOWIE / ODENTON.
5.) Turn RIGHT onto CHAPEL LAKE DR.
6.) Turn RIGHT onto BRANDERMILL BLVD.
7.) End at 2406 Brandermill Blvd
Gambrills, MD 21054-1649, US
Who ever is in, speak up!
commit(rnd()&sense-acts)
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally Posted by CokeRx7
NOTE: (a meet that stared in the rx8club all are welcome piston and non.. )
Ok here’s the info for the meet on 1/13 (saturday) for those interested in coming out. It’s at Damon’s Grill in lovely Crofton, MD in the Waugh Chapel shopping center. Also attached to this post is the menu for Damon’s. I think anyone who has been to Damon's could agree that it’s not too expensive and the food is damn good. Also one other bonus, this place is open until 1AM, just an FYI.
...
Ok here’s the info for the meet on 1/13 (saturday) for those interested in coming out. It’s at Damon’s Grill in lovely Crofton, MD in the Waugh Chapel shopping center. Also attached to this post is the menu for Damon’s. I think anyone who has been to Damon's could agree that it’s not too expensive and the food is damn good. Also one other bonus, this place is open until 1AM, just an FYI.
...
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
I stopped by. I saw a red rx8 that left their underbody lights on in the parking lot. I parked a white minivan a couple spaces down beside the poorly parked celica. I couldn't spot anyone I recognized in Damon's so I went to the Hibachi place and coldstone instead. When I got back out the other cars where gone.
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
I got some work done on the car this weekend.
![dragster](https://www.rx7club.com/images/smilies/dragster.gif)
Always Coca-Cola
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: May 2004
Location: DMV
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by daten
I stopped by. I saw a red rx8 that left their underbody lights on in the parking lot. I parked a white minivan a couple spaces down beside the poorly parked celica. I couldn't spot anyone I recognized in Damon's so I went to the Hibachi place and coldstone instead. When I got back out the other cars where gone.
Damons said there was an hour and a half wait.. so we walked over to bob evans.. and ate there.. since NO one was in there.. :-D..
Landon is the guy with the 8.. but he didnt turn on the lights til after we got done eating.. if i'm not mistakin..
Piston Convert
Join Date: Jan 2007
Location: Severn, MD
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Hi Everybody...just happened across this thread. I'm in Severn, MD (work in Jessup right by Ellicott City) and I just bought my first FD.... a 93 R1 VR: https://www.rx7club.com/showthread.php?t=601432
Anyways just wanted to say "hi!" and would LOVE to meet up with some other local owners and check out the possibilities for my car. I have been in the Toyota MR2T scene for many years and am well versed in modified turbos...my current MR2 makes about 500 hp, and I've built and tuned the majority of it myself. I hope to do something similar (but not as extreme - maybe 300whp) with my new RX7, as the motor is on borrowed time (89k on original motor) and I'm tryign to get ideas about rebuilds or swaps.
Anyways, if you guys have local "meet and greets" like we do with MR2s I'd love to be invited. I hopefully take delivery of the car next weekend (its still down in NoVa with the previous owner) and will start tinkering right away![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Nice to see theres a good community in MD! :thumbup:
Anyways just wanted to say "hi!" and would LOVE to meet up with some other local owners and check out the possibilities for my car. I have been in the Toyota MR2T scene for many years and am well versed in modified turbos...my current MR2 makes about 500 hp, and I've built and tuned the majority of it myself. I hope to do something similar (but not as extreme - maybe 300whp) with my new RX7, as the motor is on borrowed time (89k on original motor) and I'm tryign to get ideas about rebuilds or swaps.
Anyways, if you guys have local "meet and greets" like we do with MR2s I'd love to be invited. I hopefully take delivery of the car next weekend (its still down in NoVa with the previous owner) and will start tinkering right away
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Nice to see theres a good community in MD! :thumbup:
That one is also sexual
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jun 2004
Location: Columbia, MD
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Justin311: we normally do monthy meets here in columbia at the fudruckers or other food establishments ( last time was in walmart parking lot and we ate at Baja Fresh). they are on hold due to the SUPPOSEDLY cold weather this time of year ::sits in chair sweating with the patio door wide open::
ANYwho. just keep an ear out. and YAY to a fellow Toyota enthus.
ANYwho. just keep an ear out. and YAY to a fellow Toyota enthus.
Originally Posted by eage8
I'd just like to let everyone know that timing belts are retarded....
-Myk
-Myk
Yep, just attempted one on my dad's audi... whoever did it last over-torqued the main pully bolts (******* ALLEN KEY'd) So now they are all stripped off and never coming out.
I suggested he drive it (or push it) off a cliff.
Jesus is the Messiah
![](https://www.rx7club.com/images/misc/15_year_icon.png)
AUDI: Like a VW, just more expensive when the parts fall off.
Today I drove my moped to work. Now I reek of two-stroke and gasoline. Also, people of the road and sidewalk hate me :P
Today I drove my moped to work. Now I reek of two-stroke and gasoline. Also, people of the road and sidewalk hate me :P
Originally Posted by f1blueRx7
Yep, just attempted one on my dad's audi... whoever did it last over-torqued the main pully bolts (******* ALLEN KEY'd) So now they are all stripped off and never coming out.
I suggested he drive it (or push it) off a cliff.
I suggested he drive it (or push it) off a cliff.
Please somebody help!!!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Sep 2005
Location: Woodridge, IL
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AkumaKuruma
Justin311: we normally do monthy meets here in columbia at the fudruckers or other food establishments ( last time was in walmart parking lot and we ate at Baja Fresh). they are on hold due to the SUPPOSEDLY cold weather this time of year ::sits in chair sweating with the patio door wide open::
ANYwho. just keep an ear out. and YAY to a fellow Toyota enthus.
ANYwho. just keep an ear out. and YAY to a fellow Toyota enthus.
Jesus is the Messiah
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Pffft at your timing belts and chains.
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
commit(rnd()&sense-acts)
![](https://www.rx7club.com/images/misc/15_year_icon.png)
SO! I finally got a parts car to fix my 'vert. An 86 coupe, Red inside and out. Except - it actually runs probably better than my convertible! So I'm having to decide if I sell it, keep it, or part it out to fix the vert - leaning toward selling it.
Well - actually i say it's running well - it's only running on one rotor. But it fires right up and idles dead on. But we think that's not a compression or other rotor problem, it's either fuel or spark. I'll let ya'll know as soon as we work on it a bit...meanwhile I'm driving my van
I want my convertible back
Well - actually i say it's running well - it's only running on one rotor. But it fires right up and idles dead on. But we think that's not a compression or other rotor problem, it's either fuel or spark. I'll let ya'll know as soon as we work on it a bit...meanwhile I'm driving my van
![Anger](https://www.rx7club.com/images/smilies/anger.gif)
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
commit(rnd()&sense-acts)
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally Posted by Tofuball
Pffft at your timing belts and chains.
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
![rlaugh](https://www.rx7club.com/images/smilies/rollinglaugh.gif)
Jesus is the Messiah
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally Posted by VAXHeadroom
SO! I finally got a parts car to fix my 'vert. An 86 coupe, Red inside and out. Except - it actually runs probably better than my convertible! So I'm having to decide if I sell it, keep it, or part it out to fix the vert - leaning toward selling it.
Well - actually i say it's running well - it's only running on one rotor. But it fires right up and idles dead on. But we think that's not a compression or other rotor problem, it's either fuel or spark. I'll let ya'll know as soon as we work on it a bit...meanwhile I'm driving my van
I want my convertible back ![Wink](https://www.rx7club.com/images/smilies/wink.gif)
Well - actually i say it's running well - it's only running on one rotor. But it fires right up and idles dead on. But we think that's not a compression or other rotor problem, it's either fuel or spark. I'll let ya'll know as soon as we work on it a bit...meanwhile I'm driving my van
![Anger](https://www.rx7club.com/images/smilies/anger.gif)
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
That one is also sexual
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Jun 2004
Location: Columbia, MD
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tofuball
Pffft at your timing belts and chains.
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
Jesus is the Messiah
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally Posted by AkumaKuruma
timing belts in MKIII supras are notorious for still being in good condition after 150,000 miles and not failing. I have literally not heard a single instance where the timing belt snapped.
.......
It looses teeth X_x
Zero Rotor Motorsports
![](https://www.rx7club.com/images/misc/05_year_icon.png)
iTrader: (1)
Join Date: Feb 2004
Location: Glen Burnie, MD
Posts: 2,525
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tofuball
Pffft at your timing belts and chains.
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
All your piston engines should have reed valves, just like my Peugeot!
No camshafts, no chains, belts, or any of that other crap.
:P
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)