Maryland guys!
Originally Posted by CokeRx7
It was just a question.. you can sell it.. it was a question i had... Say if you were to replace the lower and upper IM with the TII manifold.. so there wouldnt be any bump and grind right?
commit(rnd()&sense-acts)
Joined: Feb 2005
Posts: 378
Likes: 0
From: Lutherville MD
Originally Posted by Tofuball
So yeh, Theo and I towed Saheed's TII from Croften, MD, to Gaithersburg, MD (to his house)
It was supposed to have a blown engine, so we left the car in fifth gear on the highway (while it was being towed) so that the engine was spinning. The apex seals set properly, and now the car starts. However, I'm sure it has a blown coolant seal, and the oil looks like it came from the lungs of a lifetime smoker.
It was supposed to have a blown engine, so we left the car in fifth gear on the highway (while it was being towed) so that the engine was spinning. The apex seals set properly, and now the car starts. However, I'm sure it has a blown coolant seal, and the oil looks like it came from the lungs of a lifetime smoker.
Oh yeah, and the body is done on my 'vert. I called Thurs and asked if they had finished putting the factory pin-striping back on ... "um...not yet" was the answer...glad I asked BEFORE I went to pick it up
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by Crash Test Joey
What if you replaced it with an FD setup? I still have all my intake/tb stuff in boxes. I don't even know if it would fit.. but I'm trying to clean out my garage anyway
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
Well i over heard that the FD stuff would be better for a TII.. cuz how much air do i really need? if i have alot of air wouldn't i need more gas? if any of yall come across a busted S5 with the IM still in tacked let me know..
See yall at the meet
See yall at the meet
Full Member
Joined: Oct 2005
Posts: 218
Likes: 0
From: HdG Maryland
Originally Posted by NissanConvert
When and where is the meet!
Rotaries are people too..
Joined: Jan 2005
Posts: 114
Likes: 0
From: Derwood, MD
Woooeeeee
WOO HOOO My white 87 na is now DRIVABLE!!! I solved the overheating problem with a new radiator and a mazda thermostat courtesy of tofuball.
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
My Rear wiper works!
Joined: Apr 2004
Posts: 583
Likes: 0
From: Ellicott City, MD
Originally Posted by VAXHeadroom
I've not heard that trick before...My friend Ryan has a N/A that won't start, but if you push it, it will start and run. Would this maybe help his car?
Oh yeah, and the body is done on my 'vert. I called Thurs and asked if they had finished putting the factory pin-striping back on ... "um...not yet" was the answer...glad I asked BEFORE I went to pick it up
Oh yeah, and the body is done on my 'vert. I called Thurs and asked if they had finished putting the factory pin-striping back on ... "um...not yet" was the answer...glad I asked BEFORE I went to pick it up
Originally Posted by dansbbb
WOO HOOO My white 87 na is now DRIVABLE!!! I solved the overheating problem with a new radiator and a mazda thermostat courtesy of tofuball.
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
Also I am taking apart the engine on tuesday IT might take me all day......Anybody wanna help. I start at 7:30 in the morning and dont stop till i take it out =) Well thanks for u help. =)
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
Originally Posted by dansbbb
WOO HOOO My white 87 na is now DRIVABLE!!! I solved the overheating problem with a new radiator and a mazda thermostat courtesy of tofuball.
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
I just need to get it inspected now. Know anyone in the gaithersburg/rockville/derwood area?
~Dan
btw.... Initial D 19 and 20 are out if anybody wants them.
I don't know how much longer these'll work,
http://s38.yousendit.com/d.aspx?id=0...U08SGWYYUEXORY
http://s39.yousendit.com/d.aspx?id=3...41T7P6G88A4G6T
-Myk
I don't know how much longer these'll work,
http://s38.yousendit.com/d.aspx?id=0...U08SGWYYUEXORY
http://s39.yousendit.com/d.aspx?id=3...41T7P6G88A4G6T
-Myk
Rotaries are people too..
Joined: Jan 2005
Posts: 114
Likes: 0
From: Derwood, MD
Originally Posted by CokeRx7
Where did ya get ya radiator from? i can find a thermostat..
Plus he's a really nice guy and gives very very reasonable prices. Even willing to barter sometimes.
Originally Posted by Smokems
I live in the Gaithersburg/Derwood area. Right off of airpark/woodfield road (124). What up?
Also I am taking apart the engine on tuesday IT might take me all day......Anybody wanna help. I start at 7:30 in the morning and dont stop till i take it out =) Well thanks for u help. =)
Also I am taking apart the engine on tuesday IT might take me all day......Anybody wanna help. I start at 7:30 in the morning and dont stop till i take it out =) Well thanks for u help. =)
As for the engine rebuild, I would love to help but I'll be working all day and then I have stuff planned that night. Are you going to be working on it at all during wednesday or thursday night?
~Dan
Originally Posted by dansbbb
Tofuball is the man with a plan. He has more rx7's than anyone I know. (five or six.. cant remember) and he knows how to work on them.
Plus he's a really nice guy and gives very very reasonable prices. Even willing to barter sometimes.
That's cool man. I work right off 124 (in a neighborhood off brink rd). And you know Jason? His garage is right up in laytonsville about 5-10 minutes from there.
As for the engine rebuild, I would love to help but I'll be working all day and then I have stuff planned that night. Are you going to be working on it at all during wednesday or thursday night?
~Dan
Plus he's a really nice guy and gives very very reasonable prices. Even willing to barter sometimes.
That's cool man. I work right off 124 (in a neighborhood off brink rd). And you know Jason? His garage is right up in laytonsville about 5-10 minutes from there.
As for the engine rebuild, I would love to help but I'll be working all day and then I have stuff planned that night. Are you going to be working on it at all during wednesday or thursday night?
~Dan
wzzzzzz.....bubbubbbubb!!
Joined: May 2004
Posts: 51
Likes: 0
From: ca now md
i finally got here!
hey gals and guys, the trip from cali has been achieved... about dagg-on time. so, i'm dying to meet some east coast rotaries. i actually ran into a black s4 one rainy night last week.
anyway, its good to be here. hope we get to run into each other, sooner or later.
anyway, its good to be here. hope we get to run into each other, sooner or later.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by dansbbb
Tofuball is the man with a plan.
Wow, thanks :p
Originally Posted by DarkAngelKamui
Alrighty kids, i'm thinking about doing something that I haven't tested waters for in awhile....
Anybody interested in a modded 89 240SX and an 85 RX-7 GS?
Anybody interested in a modded 89 240SX and an 85 RX-7 GS?
Originally Posted by rotoinfin
hey gals and guys, the trip from cali has been achieved... about dagg-on time. so, i'm dying to meet some east coast rotaries. i actually ran into a black s4 one rainy night last week.
anyway, its good to be here. hope we get to run into each other, sooner or later.
anyway, its good to be here. hope we get to run into each other, sooner or later.
Rotary Freak
Joined: Apr 2003
Posts: 2,702
Likes: 1
From: DC Area
haltech e6x tuning again tonight at Dans shop (inside out of the rain for wanna bee tuners) if anyone wants to see a bad *** 2nd gen that loves to pop off vacumm caps everytime I boost it. Anyways all are invited to come up and play. PM me if you need directions......(cough cough Tofu already knows how to get their and should not need directions.)
YF-19 why don't you make a guest appearance and pick up your damn CF window switches.
YF-19 why don't you make a guest appearance and pick up your damn CF window switches.
Beat Ninja
Joined: Nov 2003
Posts: 2,076
Likes: 0
From: San Clemente, CA
Originally Posted by Tofuball
Why would you sell your only running car? :p
And since my RX-7 has been giving me **** lately (crapping out while i'm driving, running rich, fixing ****, etc), it's made my decision all the more clear...
So yeah, i'm dead serious.... 240SX and RX-7 GS for sale....
Originally Posted by DarkAngelKamui
I've got other plans....
And since my RX-7 has been giving me **** lately (crapping out while i'm driving, running rich, fixing ****, etc), it's made my decision all the more clear...
So yeah, i'm dead serious.... 240SX and RX-7 GS for sale....
And since my RX-7 has been giving me **** lately (crapping out while i'm driving, running rich, fixing ****, etc), it's made my decision all the more clear...
So yeah, i'm dead serious.... 240SX and RX-7 GS for sale....
are you getting the extra jet mode too?
EDIT: it's probably just because it's getting cold and it's carburated... my corolla's been acting a little wierd too.
