Maryland guys!
Rotary Enthusiast
Joined: Sep 2003
Posts: 833
Likes: 0
From: MD
FEED me
Hey all. If you're interested in a busted original FEED lip for a S5 front bumper, show up to this Sunday's meet and buy me lunch and it's yours.
You need someone that's really good with fiberglass to bring it back to life. It's still in 1 piece (barely) but some areas/holes are cracked and there's a big chunk missing. And for the record, that's the way I got it. I didn't add or subtract any more damage to it. If you know someone that can recreate that missing area, then you're gold.
Pics attached if you're interested.
(It's the red one. The white one is already on my car so don't ask. =P)
You need someone that's really good with fiberglass to bring it back to life. It's still in 1 piece (barely) but some areas/holes are cracked and there's a big chunk missing. And for the record, that's the way I got it. I didn't add or subtract any more damage to it. If you know someone that can recreate that missing area, then you're gold.
Pics attached if you're interested.
(It's the red one. The white one is already on my car so don't ask. =P)
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Originally Posted by AkumaKuruma
dude, waldorfs pretty far away from the rest of us.
Side note: Jason, I think my digital camera is either at your house or up somewhere at the farm... I thought I put it on my passenger seat, but on the way home, I couldn't find it... I doubt anyone broke into my car and took it because they woulda taken the charger and everything for it. (It doesn't use AA batteries, nor does it have a standard USB port.)
Call me if you find it.
Last edited by Pele; Sep 23, 2005 at 08:59 AM.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by YF19
Hey all. If you're interested in a busted original FEED lip for a S5 front bumper, show up to this Sunday's meet and buy me lunch and it's yours.
You need someone that's really good with fiberglass to bring it back to life. It's still in 1 piece (barely) but some areas/holes are cracked and there's a big chunk missing. And for the record, that's the way I got it. I didn't add or subtract any more damage to it. If you know someone that can recreate that missing area, then you're gold.
Pics attached if you're interested.
(It's the red one. The white one is already on my car so don't ask. =P)
You need someone that's really good with fiberglass to bring it back to life. It's still in 1 piece (barely) but some areas/holes are cracked and there's a big chunk missing. And for the record, that's the way I got it. I didn't add or subtract any more damage to it. If you know someone that can recreate that missing area, then you're gold.
Pics attached if you're interested.
(It's the red one. The white one is already on my car so don't ask. =P)
Rotary Enthusiast
Joined: Sep 2003
Posts: 833
Likes: 0
From: MD
Originally Posted by Tofuball
Sold.
Originally Posted by CokeRx7
YF19.. Is rod still backed up??? cuz i would like to get my side skirts put on at least.. the rear and front bumpers.. I have a body kit just need it on...
Rotary Enthusiast
Joined: Sep 2003
Posts: 833
Likes: 0
From: MD
Originally Posted by falnfenix
...will probably be there through the next millenia.
Originally Posted by Bukwild
You can put on side skirts with 8 sheet metal screws and 1 power drill. Takes 15 minutes. Don't pay them to put them on just to paint them. It will save you a few bucks.
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
Well they are the ones that just put on top of the car already.. so not really any screws mainly duck tape and glue.. but i dont want it to look like it was just put on there i want body filler or something to make it look part of the car ya know?
Junior Member
Joined: Sep 2005
Posts: 18
Likes: 0
From: maryland
well figured there might be a few near waldorf...but besides that a drive on the beltway ina fast car is always fun.... i know i enjoyed it in my mr2 when i was going back and forth to laurel 3 times a week....was always someone to race who thought they had something
That one is also sexual
Joined: Jun 2004
Posts: 1,671
Likes: 0
From: Columbia, MD
Originally Posted by motoworx
well figured there might be a few near waldorf...but besides that a drive on the beltway ina fast car is always fun.... i know i enjoyed it in my mr2 when i was going back and forth to laurel 3 times a week....was always someone to race who thought they had something
Rotary Enthusiast
Joined: Sep 2003
Posts: 833
Likes: 0
From: MD
hey all, if anyone has the following FC parts just laying around doing nothing, let me know if you want to give them up:
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Originally Posted by ErikTheDead
Theo - PICS!
I'll grab it tomorrow evening, if Jason swings by/has swung by the farm.
glass half empty, chug!
Joined: Mar 2003
Posts: 228
Likes: 0
From: Maryland
Originally Posted by YF19
hey all, if anyone has the following FC parts just laying around doing nothing, let me know if you want to give them up:
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.
Originally Posted by AkumaKuruma
got you beat right now. spent the last week commuting from Upper Marlboro all the way up to Reisterstown which is at the far end of 795 NW of Baltimore and BACK for work cuz my g/fs been in town.
ode to the dumb **** women make men do.
damn their vile souls.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by YF19
hey all, if anyone has the following FC parts just laying around doing nothing, let me know if you want to give them up:
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.
1. left and right lower ball joint (left needed immediately)
2. left and right inner and outter tie rods (left needed immediately)
3. upper strut mounts
4. power steering piping (can't remember the actual name .. it runs down and in front)
let me know asap thanks.