Maryland guys!
That one is also sexual
Joined: Jun 2004
Posts: 1,671
Likes: 0
From: Columbia, MD
Originally Posted by muythaibxr
I started my xanga like forever ago, back when xanga was really the only blog site around... and I'm too lazy to move anywhere else...
And x0ny: if the hachi is ready, I'll drive it... It depends on how fast Julian and I work, and whether we can find someplace around CP that does good alignments.
And x0ny: if the hachi is ready, I'll drive it... It depends on how fast Julian and I work, and whether we can find someplace around CP that does good alignments.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by CokeRx7
Well give me the address and i'll map it.. I'm getting my gps system soon.. so watch out.. :-D
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
LiveJournal, DeadJournal, Xanga, MySpace, shitty composition book from the 5th grade, Journal.DOC word document, journal ordered by psychiatrist... 'Tis all the same, The entries start out once a day, then once a week, then once every once in a while... Till the last entry was sometime last year and I delete everything and forget about it.
i love AWD
Joined: Feb 2004
Posts: 1,836
Likes: 0
From: Baltimore, MD
Originally Posted by Lt. Dan
Yup, that's a set of louvers.... They're REALLY cool when the attachment points rust out, and it comes off when you're on the freeway.... They get really good air!!!!!
Dan
Dan
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by Lt. Dan
Yup, that's a set of louvers.... They're REALLY cool when the attachment points rust out, and it comes off when you're on the freeway.... They get really good air!!!!!
Dan
Dan
Registered Abuser
Joined: Jul 2003
Posts: 697
Likes: 0
From: Upper Marlboro
This is gay. Replaced the water pump today and car seems to be running at normal temps until I get on it. Only got on it for maybe 2 minutes and temps started goin up a bit. After parking the car at home, I gave it a nice look over and I noticed no loss of coolant. I'm thinkin maybe something didn't go right with this block weld thing. It worked but its not working... that makes no sense but o well. Inspected the old water pump and there is no visible damage. Ugg... I'll do a more thourough inspection tomorrow. I need a haircut
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Thats what RX-7s do stock, sit around 180 degrees or so and then you nail it and it climbs to 207 :p It is why they put dummy gauges in the S5, and why the S4's normal operating temp location is 1/4 of the gauge, while the 'after hard racing' position is 1/2 the gauge :p
Registered Abuser
Joined: Jul 2003
Posts: 697
Likes: 0
From: Upper Marlboro
Originally Posted by Tofuball
Thats what RX-7s do stock, sit around 180 degrees or so and then you nail it and it climbs to 207 :p It is why they put dummy gauges in the S5, and why the S4's normal operating temp location is 1/4 of the gauge, while the 'after hard racing' position is 1/2 the gauge :p
I just doubt that the needle going over 1/2 is normal.
Last edited by 13Beast REW; May 11, 2005 at 06:12 AM.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by 13Beast REW
Try 1/4 normal operating temp and 3/4 after some simple twisted roads at no less than 6000 RPM. Or... like this morning, just under 1/2 during normal driving (not more than 4K RPM) but goes back down to 1/4 if you sit long enough at a red light, say... a little over a minute.
I just doubt that the needle going over 1/2 is normal.
I just doubt that the needle going over 1/2 is normal.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Originally Posted by Tenacious
I'm fairly new to this forum, but I'd like to meet a couple of you guys, I live in Olney Maryland, only 2 guys I've met in the area are Eugene(silver r1) and Ravi (montego blue rx7). I'm currently working on my Rx7, not driving it until its done. Hope to hear from you guys. See yah!
Registered Abuser
Joined: Jul 2003
Posts: 697
Likes: 0
From: Upper Marlboro
Yea I started thinkin about that while I was driving to work this morning. I took the thermostat out before pouring the stuff in and got a new one since it was out anyway. Haven't put the new one in yet. I'll flush the radiator but I may just end up getting an aftermarket one anyway.
Beat Ninja
Joined: Nov 2003
Posts: 2,076
Likes: 0
From: San Clemente, CA
Originally Posted by 13Beast REW
Tofuball is Online:
Join Date: May 2003
Location: Greenbelt, MD <---- REALLY?? Since when?
Posts: 2,568
Join Date: May 2003
Location: Greenbelt, MD <---- REALLY?? Since when?
Posts: 2,568
Originally Posted by Tofuball
So, who else is up way too early?
Viva la sub 4 o clock.
Viva la sub 4 o clock.
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Cuz I fell back asleep
I woke up cuz I was thirsty.
And yeh, it is Berwyn Heights, but almost know one knows where that is offhand, but tons of people know where Greenbelt is :p
I woke up cuz I was thirsty.
And yeh, it is Berwyn Heights, but almost know one knows where that is offhand, but tons of people know where Greenbelt is :p
Jesus is the Messiah
Joined: May 2003
Posts: 4,848
Likes: 0
From: Silver Spring, MD
Hey Ken (and others who would be interested), check out these ignition threads!
https://www.rx7club.com/showpost.php...6&postcount=16
https://www.rx7club.com/showthread.p...4&page=1&pp=15
https://www.rx7club.com/showpost.php...6&postcount=16
https://www.rx7club.com/showthread.p...4&page=1&pp=15