I have that socket. I got from Sears and the damn thing cost me over $50 and I've used it only 5 times in 2 years. You can try Advance Auto. They have a loner tool program.They may have it. Also, Harbor Freight may have it. They would be the cheapest I think.

 

ahhhh.......damn. i saw one on ebay that was 20 bucks and 15 for shipping. i guess ill try that. i called one of my buddies and he said adavnce doesnt have them.



or you could lend it to me....

 

It is 54 MM I think, and english is 2-3/16 (I think on both of those), but I am pretty sure is is not 2-1/8. I need to look at my socket and see what it is.

Anyway, if I was going to spend $50 the Mazdatrix one is much better to use:

http://mazdatrix.com/toolmisc.htm

I think it is only $36, and works very well!!!!!
You need something to lock the flywheel and of course the best is their tool which is a long bar with holes drilled in it that hold it by the bolts or alignment pins. If you do these cars from time to time, they are worth getting.....

 

yeah i saw that. i was wondering if anyone had that piece too. i dont plan on changing my clutch or flywheel that often so i was wondering if anyone had one.

we measured it and it said it was 2 1/8". on mazdatrix it says it is 2 1/8".

 

hay bong what is your number again i miss placed it .


and also when you want to return each others things? lol

 

652-1846

 

hey guys , i guessed everyone noticed it rained tonight, so Langley was cancelled .

Hey Calvin have you ever looked into having a meet at Langley ??? Just wondering ???

Im sure for those who wanted to run the track and those who did not want to could have a picnic or cook out in the pits. Maybe we could even invite the Richmond club ,????

Just a thought . I have no idea what the track would cost ??? I looked into it awhile back but forgot the amount

 

its a sign!! i can boost a huge 5 psi.....haha.

FINALLY got my flange to fit my greedy BOV.... put it on and its an improvement ,from stock and yeah my stock bov was bad.....

experamented with a friends boost preasure sensor n318 and was boosting
4-5 psi ..??and swapped it to a non turbo preasure sensor .same thing boosting???? 3-4 psi lost some psi due to turbo issues. car responds quicker since the new bov ..

would a faultly bov be considered a vac leak ????????

now car smokes cause turbo is leaking oil no surprise there since it did that before.

mike call me back about that turbo rebuild hybrid you was talking about a while back i need more info on this ... to figure out what you need on the turbo that is good or not or this rebuild replaces EVERYTHING in it???? please call me back. thanks.

i have a lot to say since i work like every day!

 

$100 a person for 5 hours last time i checked, but maybe they could give us a deal as a group.

also the guy with the third gen in my class is named chris and his car is black with red interior. he said it was the only one registered in VA with red interior, dont know if thats true or not.

and renegade, is that your FC in the autoshop with no tranny or driveshaft in it.

 

Only a few silver FD's came with a red interior. If his is black, then the car got painted or the interior was redone.

 

thats one of those limited edition ones and he's not the only one with it. del has a black touring with red leather interior his sn is ddr10 or something like that.

 

if your talking about the one on 17 then no
my fc is sitting where i can keep a watchful eye over it

a guy i work with said he pulled a tranny out of a fc at tncc though i was wondering if that was you

 

I was beside someone in front of ODU yesterday with a silver FD wiht some sort of black aftermarket wheels... anyone know who that is?

I should be at the meet saturday with the shirts. Here is the list of who and what I have. There are some extras as well. Bring $$$'s Saturday (don't worry, I am not going to hound you if you don't have it).

http://numsum.com/spreadsheet/show_raw/28443

But they will be there and I hope to get rid of as many as possible.

 

Don't know him, but I've seen him before.

 

Where on RT 17 , I drive down that road 20 x a days and haven t seen one ????

 

Hey guys, Jake is looking for help working with his Haltech on hsi GSLSE. Anyone want to take a trip up to see what he has going on. It sounds pretty interesting:

http://www.hamptonroadsrotaryclub.co...opic.php?t=140

 

where is glouschester?

 

On the Middle Penninsula, just past the Coleman bridge.

 

Jake lives in a relatively rural place... Very cool location though.. Has a nice sized shop behind his house. He has a couple of acres he drives around through the weeds with his sorta offroad rally set up first gen RX7.

We should have a club event at his house, hanging out talking about RX7's....

here is his photo gallery...

http://www.hamptonroadsrotaryclub.co....php?cat=10004

you get the idea from those.

 

that would be cool.

and Renegade thats not my FC, but i have one the same color. anyone else know who has a red fc with a black passenger fender and a tein sticker on the front lense?

 

Thats the way we did it in the last club I was in. If a club member need major help, the club showed up with a grill, beer, and whatever else and made a day of it. Had a cook out and got to work on someone's ride. It always worked out nice. Something to thing about.

 

Can't beat beer, food, AND 7's.

 

thats very true! cant beat beer and a grill. If its on the weekend i know i would try to help somebody out. I am going to try to be at the meet on saturday. I can finally start to see things a little clearer after the lasik eye surgery.

 

That was meeee!!!

Ive seen your red FC before at school. looks good man. areyou in the auto class?


I live in Gloucester. whats going on in gloucester? iam trying to get involved with all the rotary doods out there. i only know about 3.

 

near the walmart and GI Joes