We have room for more.

Anyone else want it?

 

Hey Eric, been too long man!

Eric - the guy who took over the shop since Steve left - is working on my FD right now. I'd like to think, but don't have much confidence, that it'll be running by dyno time. Steve never touched it, and John took the money I gave him and just spread my parts around ... so it's basically in the same state it's been for years. But somehow if it IS running I'll be at the dyno day. I wish I could commit to it, but it's been nothing but let-downs for the last decade as far as my 7's are concerned.

On a side note, if somebody wants to work on the car I'd happily pay a good mechanics rate. I haven't had the time to work on it for years now, and have been offering everybody $$$ to work on it ... but nobody wants my money it seems???

 

Ryan, what all needs to be done with it?

 

YOu got me on the list right?

Sorry that pro-comp box wasnt what you needed, I'm just waiting for my fc coil to show up.


And Ryan whats needed to get yor Fd running?

 

Basic stuff ... fit up the fuel system, wiring for dual pump setup, wire in battery reloaction, hook up the rest of the harness, dual oil cooler setup needs finished install. There's a fair amount of stuff that needs done, nothing hard just time consuming. Eric at the shop is going to make the IC tubing and downpipe, and some custom ducting.

I know I'm lame for not doing it myself, but that's life ... other stuff comes up and takes priority.

 

Well I am not in need of any tuning but wouldn't mind looking on and meeting some of the local folks. And it does appear that my schedule is free that weekend. Is there any particular time that more of you will be at the shop during those 2 days; or is it going to be a 48 hour party?

 

It's usually a 48 hour party but most active on saturday since we're usually hung over on sunday.

 

Thats the facts jack. Although im not hitting the sause till I get a chance to play around with the car a bit after its tuned.

Good thing im second.

 

Good to know. I just found out I'll be manning a booth at the European Car Show on Sunday, so I will try to keep the Saturday open.

 

Mike, do you still have those 1st gens sitting? I need some 1st gen interior parts...

 

I do, but still terriblely un-organized. PM or email me w/ what you need and I'll see if I can find it.

 

A few months ago, I was at Burketts shop checking out your rides. It looked like you had exactly what I needed...... door panels, headliner, dash etc. etc. etc.

 

HA! I've reluctantly deceided that many of those will be going to the crusher after being totally stripped. I may have copies of what you want in better shape too though.

 

The condition won't matter too much since it will all most likely be re-upholstered anyhow. I can talk to you the weekend of our get together if you want.

 

Sounds good.

 

Steve Kan Tuning Information

Steve Kan will be in St.Louis from June 5th through June 8th. He'll be tuning on the June 6th-7th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.

$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps

Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.

(Make checks out to Steve Kan)

Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________


Tuning list:

1. Bob Willis (Deposit Recieved)
2. Siguy2k (Deposit Received)
3. Viking War Hammer (Deposit Received)
4. Juiceh (Deposit Received)
5. Nitronatefc (Deposit Received)
6. Wackaloo13 (Deposit Received)
7. BOOSTD7 (No deposit received)
8. Powermalex (Paying the day of)
9. Adamrx7 (Paying the day of)



__________________________________________________ ______________




DYNO INFORMATION

Dyno time is $80/Hr

Address is:


Genes Automotive
1401 Mississippi Ave
Bay #3
East St. Louis IL, 62201

Dyno List:

1. Bob Willis
2. Siguy2k
3. Viking War Hammer
4. Juiceh
5. Nitronatefc
6. Wackaloo13
7. BOOSTD7
8. Powermalex
9. Adamrx7

__________________________________________________ ______________

Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.

"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."


If you want to be added to the list, please let me know asap.

 

Guys, I've been posting the wrong address for the dyno.

The correct information is,

Genes Automotive
3596a George St
Highland, IL 62249
Phone 618.654.6343

http://geneshighperformance.com/shop.html

 

Steve Kan Tuning Information

Steve Kan will be in St.Louis from June 5th through June 8th. He'll be tuning on the June 6th-7th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.

$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps

Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.

(Make checks out to Steve Kan)

Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________


Tuning list:

1. Bob Willis (Deposit Recieved)
2. Siguy2k (Deposit Received)
3. Viking War Hammer (Deposit Received)
4. Juiceh (Deposit Received)
5. Nitronatefc (Deposit Received)
6. Wackaloo13 (Deposit Received)
7. BOOSTD7 (No deposit received)
8. Powermalex (Paying the day of)
9. Adamrx7 (Paying the day of)



__________________________________________________ ______________




DYNO INFORMATION

Dyno time is $80/Hr

Address is:


Genes Automotive
3596a George St
Highland, IL 62249
Phone 618.654.6343

http://geneshighperformance.com/shop.html

Dyno List:

1. Bob Willis
2. Siguy2k
3. Viking War Hammer
4. Juiceh
5. Nitronatefc
6. Wackaloo13
7. BOOSTD7
8. Powermalex
9. Adamrx7

__________________________________________________ ______________

Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.

"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."


If you want to be added to the list, please let me know asap.

 

Im going to try and sell my bed and dresser to pay for gas and food. If i sell it im in will let you know.

 

Now, that's tryin.

 

how many times can I jack up the tuning list?

 

Steve Kan Tuning Information

Steve Kan will be in St.Louis from June 5th through June 8th. He'll be tuning on the June 6th-7th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.

$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps

Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.

(Make checks out to Steve Kan)

Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________


Tuning list:

1. Nitronate (Deposit Recieved)
2. Cowsniper (Deposit Received)
3. Viking War Hammer (Deposit Received)
4. Gohan3rdift (Deposit Received)
5. Juiceh (Deposit Received)
6. Supsai7 (Deposit Received)
7. BOOSTD7 (Paying the day of)
8. Powermalex (Paying the day of)
9. Adamrx7 (Paying the day of)



__________________________________________________ ______________




DYNO INFORMATION

Dyno time is $80/Hr

Address is:


Genes Automotive
3596a George St
Highland, IL 62249
Phone 618.654.6343

http://geneshighperformance.com/shop.html

Dyno List:

1. Nitronate
2. Cowsniper
3. Viking War Hammer
4. Gohan3rdrift
5. Juiceh
6. Supsai7
7. BOOSTD7
8. Powermalex
9. Adamrx7

__________________________________________________ ______________

Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.

"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."


If you want to be added to the list, please let me know asap.

 

LOL. I saw my name on the list and was like .? I wish I could make it this time also but can't. Seems like it will be a good time. Have fun guys!

 

yeah, sorry... I was having a weird week

 

Two weeks to go.............

How's everyones car coming?

I only have one last thing to do this weekend, install my 6al. Then, I'm trailering it over to the dyno this week.