Steve Kan Tuning / June 6-7th 2009 / St.Louis Metro Area
#76
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Another deposit received !
Steve Kan Tuning Information
Steve Kan will be in St.Louis from June 5th to June 8th. He'll be tuning on June 6-7th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.
$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps
Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.
(Make checks out to Steve Kan)
Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________
Tuning list:
1. Nitronate(Deposit Recieved)
2. Cowsniper (Deposit Received)
3. Viking War Hammer (Deposit Received)
4. Juiceh (Deposit Received)
5. Gohan3rdrift (Deposit Received)
6. Supsai7 (Deposit Received)
7. Powermalex (Paying the day of)
__________________________________________________ ______________
DYNO INFORMATION
Dyno time is $80/Hr
Address is:
Genes Automotive
3596a George St
Highland IL, 62249
http://geneshighperformance.com/shop.html
Dyno List:
1. Nitronate
2. Cowsniper
3. Viking War Hammer
4. Juiceh
5. Gohan3rdrift
6. Supsai7
7. Powermalex
__________________________________________________ ______________
Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.
"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."
If you want to be added to the list, please let me know asap.
Steve Kan will be in St.Louis from June 5th to June 8th. He'll be tuning on June 6-7th which falls on a saturday and sunday. His rate is $350 for a basic tune which requires a deposit of $200. Listed below is the pricing structure for custom tunes.
$350 - Stock turbo up to 12psi of boost (pump gas only) 1 map
$400 - Aftermarket turbo up to 16psi of boost (pump gas only) 1 map
$450 - Aftermarket turbo from 16psi - 25psi of boost (race gas and/or auxiliary injection only) 1 map
$600 - aftermarket turbo up to 25psi of boost (pump gas and race gas tune) 2 maps
Deposits can be sent to my address. I'll hand the deposits over to Steve when he arrives.
(Make checks out to Steve Kan)
Eric Cheatham
11 Lincolnshire BLVD
Belleville IL, 62221
__________________________________________________ ______________
Tuning list:
1. Nitronate(Deposit Recieved)
2. Cowsniper (Deposit Received)
3. Viking War Hammer (Deposit Received)
4. Juiceh (Deposit Received)
5. Gohan3rdrift (Deposit Received)
6. Supsai7 (Deposit Received)
7. Powermalex (Paying the day of)
__________________________________________________ ______________
DYNO INFORMATION
Dyno time is $80/Hr
Address is:
Genes Automotive
3596a George St
Highland IL, 62249
http://geneshighperformance.com/shop.html
Dyno List:
1. Nitronate
2. Cowsniper
3. Viking War Hammer
4. Juiceh
5. Gohan3rdrift
6. Supsai7
7. Powermalex
__________________________________________________ ______________
Everyone needs to make a checklist before Steve Kan arrives. This is what he said in an earlier post.
"Here're some items to inspect/replace before the dyno. New plugs (less than 1k miiles), new fuel filter (less than 5k miles), inspect spark plug wires, oil change, full tank of whatever gas you normally run, inspect tires (no nails or anything that can fly out during the dyno), inspect coolant fluid (change if necessary), clean air filter, put all the mods in that you plan to run before coming to the dyno (I don't think there'll be enough time to install them on the same day)."
If you want to be added to the list, please let me know asap.
#79
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
I will see what I can do. I am only over Classifieds now, I dropped 7 sections the other day, so I am limited on powers.
Actually, yeah, it's done. You want a sticky also?
#90
I made 340RWHP.
Its good enough Seems like Steve made the drivability on 5th gear only.
When crusing around city/town on 3rd or 4th gear my wideband reads ~10af or lower.
I wonder if I should replace the O2 sensor?
It pops and back fires when the motor is not loaded. at around 30-40 MPH
The FD runs great at ***** out though.
#99
*** Bless The USA
Thread Starter
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Yeah, I'm getting tuned. I got my wheel tubs done and finished this weekend. The only thing I NEED to do .......... is throw a msd 6al on there. I mean, I guess I don't have to but I would like to...