petree_777

iTrader: (1)

i just went to the dyno today and wasted 150 dollars for nothing. come to find out that my timming was not advancing at all. and yes my timming lock is off. any idease. the car idle good but just no advancing.
thanks vince

rx72c

iTrader: (8)

Make sure first your tps is calibrated correctly. And it is going from 00 to a higher number as soon as you touch the throttle.

Next.

Check yout opt_TIMmax and make sure its on at least 40 degrees.

Next
Check your opt_TIMtrm is set to 0

Next check your opt_Static is set to 0

And just check one more time your timing lock is off. And you should be ok

petree_777

iTrader: (1)

you are the ****. my timming max was set to 0 and i set it to 40 and it worked perfect. i guess that the tunner that i went to didnt know what they were dooing on microtech they realy only deal with haltech.
thanks rx72c, evertime you come to save my ***. youre the **** thanks again