Hello, im trying figure out if my LT10s ecu will log any aux inputs like a dual EGT sensor 0-5v output or a wideband o2 0-5v. I searched and all the info i found was for the lt8 ecu. Im getting ready to buy some thermocouplers ect for a dual egt setup but i guess its a waste of money if i cant log it on the microtech data log screen.. also my AEM wideband o2 sensor has a 0-5v output for logging so im hoping i can connect that to the LT10s as well.

 

You can only log if you ecu was ordered with 02 option which I'm assuming you don't have since you would know if you spent the hundreds extra for it.

 

what are the aux input wires on the ecu for then? can i log a 0-5v egt signal?

 

From what i read in the manual. they are more triggers than data acceptors. They act like switches to turn on certain conditions on the ecu or trigger another piece of equipment. For example a switch to turn up your idle when you turn on the AC or a switch to arm your 2 step feature. So its just an on or off setup, not an analog data recorder. Yes.... It sux

 

thats the stupidest thing ive ever heard! wtf is the point of getting this ecu if you cant log any aux inputs..ill be looking into a different ecu

 

Welcome to the club of pissed off Microtech Owners...you are member #10000000000001

 

haha yeah i guess so...its such a nice ecu its a shame it dosent have a couple more features like this...

 

ive got the lc1 running with the lt10s

 

i know i can send back the ecu and wait 60 days to get it back just to be able to log AFR but im more interested in logging EGT. I can already log the accurate o2 reading on the dyno.

 

you have the wideband option? What settings you put in the Lc-1 for it to read properly?

 

yes got the -5 volt when orded it have a read of this https://www.rx7club.com/microtech-111/aem-wideband-microtech-812851/

 

I cant log either with my LT10s so I went to wb02.com and bought the 3E2 to do my logging

 

^^ um wow that unit is amazing!!! more info please..are you logging EGT's with it? if so what thermocouplers are you using?

 

I don't think I'll be logging my EGTs. I don't think I really need to right now I have a very mild setup.

All I am logging is my maf, rpm, and afr. you have a PM btw

 

look at this unit, i've been looking at it and contemplating.
http://www.innovatemotorsports.com/products/lma3.php

 

your logging MAF?? dont you have a microtech? dosent that eliminate the MAF?
you have pm..im wondering where you ordered your unit from and how long it took you to get it if you ordered it from Aus