Introduce yourself New members post about yourself here...

JDM in the USA !!!

Thread Tools
 
Search this Thread
 
Old 05-20-19, 07:37 PM
  #1  
Junior Member
Thread Starter
 
AGuidroz's Avatar
 
Join Date: May 2019
Location: NEBRASKA
Posts: 13
Received 1 Like on 1 Post
JDM in the USA !!!

Hello everyone, just stopping by to introduce myself! My name is Anthony and I recently purchased a 1992 Efini RX7 Type R imported from Japan to the US! Only 28k miles and pretty much OEM with the exception of wheels, coilovers, and some interior bits. Looking forward to my new journey into the rotary world! Any advice is greatly appreciated!
The following users liked this post:
Daronh (05-20-19)
Old 05-20-19, 07:55 PM
  #2  
Rotary Freak


iTrader: (1)
 
Join Date: Jul 2001
Location: JAX, FL
Posts: 1,972
Received 147 Likes on 118 Posts
Great looking car. I also have a 1992 Type R, in Florida. Even with the low miles, take a good look over everything. One important bit is the coolant system, the rubber hoses get hard and brittle with time and heat! Enjoy.
Old 05-20-19, 08:09 PM
  #3  
Junior Member
Thread Starter
 
AGuidroz's Avatar
 
Join Date: May 2019
Location: NEBRASKA
Posts: 13
Received 1 Like on 1 Post
Been under the car a few times since purchased back at the beginning of April. So far i've found a couple of very minor leaks.

First was the power steering hose that runs from the reservoir to the pump. I think its a 2 1/2in long 5/8 return line. Replaced it last week and problem is solved.

Now I am currently seeing oil around the drivers side where the trans bolts to the engine. Thinking its either the oil pan gasket, rear main, or something higher up but can't confirm.
The car is going to a certified tech Wednesday for diagnosis of that leak... hopefully its not too involved as id like to have it fixed quickly.
I drive this car a few times a week to the MANY car shows in and around the Omaha area.
Old 05-20-19, 08:22 PM
  #4  
Rotary Freak


iTrader: (1)
 
Join Date: Jul 2001
Location: JAX, FL
Posts: 1,972
Received 147 Likes on 118 Posts
I hope you have a mechanic familiar with the RX7 near by. If not it will benefit you greatly to diagnose and repair on your own. These are special cars that require special eyes. Post your issues in the new member technical section and i'm sure you'll get some help.
Old 05-22-19, 08:32 PM
  #5  
Full Member
 
ToxicMongoose's Avatar
 
Join Date: Jun 2018
Location: GA
Posts: 66
Received 8 Likes on 6 Posts
Yes, make sure it is a rotary specific mechanic if your not doing the work yourself. Car looks clean!
Old 05-24-19, 12:34 PM
  #6  
Newbie
 
brilliantslide's Avatar
 
Join Date: Nov 2018
Location: Ca
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
damn that is a beauty, can you tell me any more about the import process?
Old 05-26-19, 03:57 PM
  #7  
Junior Member
Thread Starter
 
AGuidroz's Avatar
 
Join Date: May 2019
Location: NEBRASKA
Posts: 13
Received 1 Like on 1 Post
Originally Posted by brilliantslide
damn that is a beauty, can you tell me any more about the import process?
I do not know the specifics of importing as I did not import this car myself. I purchased it through an import dealer in Wisconsin. The owner is a good friend of mine and knows this business inside and out, not to mention his inventory is one of the cleanest in the country. Check him out at jdmautoimports.com and contact him with any questions!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FNM
3rd Generation Specific (1993-2002)
40
09-15-04 12:57 AM
KTN-89
3rd Generation Specific (1993-2002)
4
08-11-04 11:54 AM
j200pruf
2nd Generation Specific (1986-1992)
6
12-27-03 10:11 PM
pinkfloyd
2nd Generation Specific (1986-1992)
15
09-16-03 01:04 AM
suprfast
3rd Generation Specific (1993-2002)
5
05-27-02 08:43 PM



Quick Reply: JDM in the USA !!!



All times are GMT -5. The time now is 10:00 AM.