New tereo Install 56k be scared!
#28
What?
Thread Starter
Ok, the secret to the 7 and rotor design. All I did was cut out the designs from 1/2" mdf for the rotor (because I wanted it to stand out more) and 1/4" masonite for the rx 7 one. I used 3M 77 spray adhesive on both the carpet and surface. When you use carpet, please use and unbacked carpet as it is much easier to stretch. I start at one side of the design and work over pushing the carpet up against it and making sure its tight (large flat head screw driver). All you do from there is to work aroundthe project slowly streatching and tucking as you go. It just time (around 15 inutes for the RX 7 logo).
http://www.partsexpress.com/pe/showd...number=260-765
http://www.partsexpress.com/pe/showd...number=260-765
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM