messing with the hood
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: mn
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
messing with the hood
So I picked up some vents from my local U-Pull-It off a mid 80 GTA Trans Am and put them on my spare hood .. I did this to help relive under hood temps..
Heres some pics .. this is just a start the hood will be painted and is goning on my other 7 ..
Heres some pics .. this is just a start the hood will be painted and is goning on my other 7 ..
#4
Junior Member
Thread Starter
Join Date: Aug 2006
Location: mn
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
its a fog light ... it had two when i got it but they were both bad .. That ones still on there cause i havent goten the saw out yet to get to the striped screw out.
Trending Topics
#10
Junior Member
Thread Starter
Join Date: Aug 2006
Location: mn
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
so I got them installed and painted.. I sanded down the hood useing the factory paint as a guide coat and got it nice and smooth... I then hit it with 4 coats of primer and 3 coats of flat black to seal it all up until I have the rest of the car ready for paint.. heres some pics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM