I have an S4 T2, upgrading to a PS1000 using stock coils and CAS.


I have no spark, the tach is moving while cranking, checked for power at the coils and its good.
Does any one have a setup for Trigger and ignition I could use to double check all the settings at the ECU?
Any help is much appreciated.

 

1. FC and Stock Coils
Trigger Angle 65
Tooth Offset 11
Spark Mode Distributor
Constant Charge
Falling Edge
4.5mS
Internal Reluctor
Trigger Edge Falling
Home Edge Falling
Trigger/Home Filter 1
Trigger Gain 2-3
Home Gain 2-3

Cheers.

 

I have all those settings in ECU already.
Update while cranking the trigger signal is rising, home signal is zero