PS1000 S4 T2 no spark
I have an S4 T2, upgrading to a PS1000 using stock coils and CAS.
I have no spark, the tach is moving while cranking, checked for power at the coils and its good. Does any one have a setup for Trigger and ignition I could use to double check all the settings at the ECU? Any help is much appreciated. |
1. FC and Stock Coils
Trigger Angle 65 Tooth Offset 11 Spark Mode Distributor Constant Charge Falling Edge 4.5mS Internal Reluctor Trigger Edge Falling Home Edge Falling Trigger/Home Filter 1 Trigger Gain 2-3 Home Gain 2-3 Cheers. |
I have all those settings in ECU already.
Update while cranking the trigger signal is rising, home signal is zero |
All times are GMT -5. The time now is 10:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands