Need to confirm if my PS1000 to RX7 gen3 IGN set up is right?


Platinum Sport 1000 to stock fd coils:


ign 1 (y/b) trailing front coil- (red)

ign 2 (y/r) leading coil (yellow/blue)

ign 3 (y/o) trailing rear coil- (blue/white)

ign 4 (y/g) not used

12v turn on (red/yellow) 12v turn on (black/red)









stock fd3s ignitor: pinout

leading coil- (light green/black)

leading input (light green)

Trailing rear coil- (light green/white)

12v turn-on (black/white)

trailing rear input (brown/black)

trailing front coil- (green/red)

trailing front input (bown)



stock fd3s coil pack pinout

12v turn on (black/red)

leading coil (yellow/blue)

trailing front coil- (red)

trailing rear coil- (blue/white)




Platinum Sport 1000 ign pin out:

ign 1 (y/b)

ign 2 (y/r)

ign 3 (y/o)

ign 4 (y/g)

12v turn on (red/yellow)

 

or is this right???


Platinum Sport 1000 to stock fd3s ignitor:

ign 1 (y/b) trailing front input (bown)

ign 2 (y/r) trailing rear input (brown/black)

ign 3 (y/o) leading input (light green)

ign 4 (y/g) not used

12v turn on (red/yellow) 12v turn-on (black/white)

 

Responded on your other thread in the Haltech forum.

http://forums.haltech.com/viewtopic....0cc3325172c8d8

 

thx i emailed haltech