Haltech E6X base line map?
#1
Rotary Freak
Thread Starter
E6X base line map?
Does anyone have a baseline map for a s4 t2 with 720-1600 setup. I am just trying to get this thing to start and run long enuff and not flood out. This would be much appreciated. I have a map from k2rd but I think some of the setting are wrong and its starting to **** me off.
#4
Rotary Freak
Thread Starter
yeah I am going to try to set the timing to zero by just cranking it. And I am going to unplug the secondaries because I think they are coming on when I start the car and its flooding the thing out. Thanks Ted
#5
BDC Motorsports
Sorry for the delay, Sean. Sent an email to Tyler with a base map for you to try. Verify that the CAS settings are accurate -> On that map it's setup with the CAS inserted in the stock location. The timing will need to be locked and zero'd out prior to doing ANYTHING to the map, ok?
B
B
Trending Topics
#9
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by eViLRotor
Just use the 6X's import function.
It only seems to correctly import the maps, though. You will have to re-do the ingition and fuel setup page, I believe.
It only seems to correctly import the maps, though. You will have to re-do the ingition and fuel setup page, I believe.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM