Haltech e6k MAIN settings
#1
Full Member
Thread Starter
Join Date: Jun 2006
Location: hawaii
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
e6k MAIN settings
ok do i set the cylinders to 2 or 4? i set it to 2 and it doesnt start and i set it to 4 and it starts. i need to change out my plugs cause there all fouled and dont spark to good. hopefully my coilpacks are good too. i just wanted to confirm that it should be set to 4. thanks,
chris
chris
#3
Full Member
Thread Starter
Join Date: Jun 2006
Location: hawaii
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
thanks. i got it running alright the idle is at around 1200 and still running at about 11.5 AFR with the injector pulsewidth at around 1.5 ms. well i just orderedme new plugs and a fc1000 from summit. are bur9eqp good all around. or should i get different ones.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM