Haltech E6K/e6x connector shield
01-06-13, 11:11 AM
#1
35r 13b first gen
Thread Starter
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
E6K/e6x connector shield
Hello,
I recently purchased an E6K used, but the harness is missing the connector shield clip piece... I'm sorry i don't know the technical name of it.
Its the yellow piece to the far right in this diagram..
http://www.haltech.com/wp-content/up...-CONNECTOR.pdf
It is the piece that clips over all the pins once the harness plug end is all together.. i think the main purpose is to help align the pins... If anyone has one or knows where i can get one that would be great! I looked a lot so far... nothing...
Thanks in advance!
I recently purchased an E6K used, but the harness is missing the connector shield clip piece... I'm sorry i don't know the technical name of it.
Its the yellow piece to the far right in this diagram..
http://www.haltech.com/wp-content/up...-CONNECTOR.pdf
It is the piece that clips over all the pins once the harness plug end is all together.. i think the main purpose is to help align the pins... If anyone has one or knows where i can get one that would be great! I looked a lot so far... nothing...
Thanks in advance!
01-07-13, 09:26 PM
#3
35r 13b first gen
Thread Starter
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
Awesome thanks!! Hey just curious I'm starting to moake my harness into a 1st gen 13bT harness.. From the diagram for E6X to FC (closest i can find to what i have), and the color diagram for E6x and E6k.. wondering if Ign Out/ pin 36 is also what you referred to as IGN 1 on the other thread?
IGN 1 to L1 and L2 pin A
IGN 2 to T1 pin A
IGN 3 to T2 pin A
Does IGN 1 = IGN OUT pin 36?
Thanks in advance!
IGN 1 to L1 and L2 pin A
IGN 2 to T1 pin A
IGN 3 to T2 pin A
Does IGN 1 = IGN OUT pin 36?
Thanks in advance!
01-07-13, 09:51 PM
#4
(mini-thread jack, but on a related topic)
my E6K wiring diagram doesnt show "IGN1, IGN2 or IGN3", but rather "DIG OUT 2, DIG OUT 1, and IGN OUT" pin 34, 35 and 36 repectively. I presume these are the 3 IGN outs? if so, which is which?
I think its...
IGN OUT = IGN1
DIG OUT 1 = IGN2
DIG OUT 2 = IGN3
???????
my E6K wiring diagram doesnt show "IGN1, IGN2 or IGN3", but rather "DIG OUT 2, DIG OUT 1, and IGN OUT" pin 34, 35 and 36 repectively. I presume these are the 3 IGN outs? if so, which is which?
I think its...
IGN OUT = IGN1
DIG OUT 1 = IGN2
DIG OUT 2 = IGN3
???????
01-07-13, 10:19 PM
#5
35r 13b first gen
Thread Starter
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
Actually E6K diagram shows
Pin
Im assuming this is the translation...
34 Digital 2 = IGN 3
35 Digital 1 = IGN 2
36 Ign.Out = IGN 1
Is this correct?
Pin
Im assuming this is the translation...
34 Digital 2 = IGN 3
35 Digital 1 = IGN 2
36 Ign.Out = IGN 1
Is this correct?
01-16-13, 02:38 PM
#7
My bad. It's a Delphi part. I assumed (should know better) it was AMP because the terminals from the AMP connector used on the Sport ECUs fit the E6 connectors. At any rate, here you go.
http://www.powerandsignal.com/docs/C...100Wheader.pdf
http://www.powerandsignal.com/docs/C...100Wheader.pdf
Trending Topics
01-16-13, 08:23 PM
#9
35r 13b first gen
Thread Starter
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
from what i can tell you have to purchase 300 of them... not sure if the part number with a B suffix is the same... i emailed them to see
