^Near the ABS

 

Installed pics can be found here

I'm planning on installing it differently:
Here is a teaser pic.

Also, Eric, you should consider doing the wiring like the pic above.
At least to me it would look a little cleaner and relieve any stress on from the wires when routing it,but that's just me.

 

OMG, I just looked at the harness myself here. My vendor has gave me the wrong connectors (both females). If you guys can send me back the PnP harness, I will cover the cost of shipping and I can reattach the right connectors back in...

I am really sorry as the first prototype they send me was correct and I had it installed on a car not remembering those were the female connectors.

Please have them ship to:

Eric Zheng
1101 Bridgeway Blvd, Sausalito CA 94965

And I will paypal you back the shipping cost.
Again, this is my fault I will take full responsibility on this mistake. Please forgive me >___<

-Eric

 

That does look really good. That's also why I have a long enough harness so it can be routed loosely without putting too much stress on solenoids. However I do like your idea and where you are relocating it.

-Eric

 

***UPDATES*** for the GB #2

Do you guys want to wait a couple more days for the new connectors to come in before I ship them out? I rather want to ship them out all at once rather then shipping them out twice with the PnP harnesses. (I already have them overnight it to me, which should arrive by midnoon tomorrow, then I can have everything else shipped out the day after)

Please let me know, thanks!

-Eric

 

Hey buddy! Small miss on ALL the PnP connectors?

Got a track on my package, the "one that went missing" ?
I think, if we can find it, and its in norway, if you send me the connector, and i can fix it with guidance from you

 

Yes, that was embarrassing of me. But hey, we all make mistakes ;-P so, as long as yall forgive me, then i am alll good!

Anyways, I am just about to head out to the office, and before that I saw your post ^^. I will get back to you within an hour alright? Thanks!

-Eric

 

Oyvind, just went to the post office. Spoke with the lady and she's saying that they only update the confirmation if necessary, therefore UNLESS i pay for their international express delivery service with tracking number and all other features for an arm and a leg...

Therefore, there isnt much I can do. I am sorry >___<.

Also, I will ship out the new connector to you and will update u with the information.

-Eric

 

Its not really a big deal for me, I have already replaced the connector with a male spare I had.

I'm wondering if they were wired correctly to begin with? I connected the wires exactly the way they were on the female PnP except now with a male connector.

 

If you just swap the harness side's connector with a female, then it should be fine. I tested all solenoids with the harness connected before shipping them out. Hope that helps ^__^


-Eric

 

I would prefer the harness shipped to me correct!
Thanks!

 

roger that. I will have it taken cared of and have them ship out to u guys!

-Eric

 

****UPDATE****

GB#2

you're kit has been shipped with the corrected harness. Thank you for your patience!

Here are your tracking information below(USPS):

KYLE HEFTE : 9405 5036 9930 0288 8158 21
MATT PAUL: 9405 5036 9930 0288 8158 76
BRYAN COOMBS : 9405 5036 9930 0288 8158 83
PHILIP BOWEN: 9405 5036 9930 0288 8158 52

Thanks all!

-Eric

 

Anyone got their package yet?

-Eric

 

Any input from first GB how this system is working? Seems like the info for this Gb is dying away! or maybe no one has had the time to install yet!

 

I think Sephek is the ONLY person that is currently installing the rack. I am sure he's got some information but not quite sure.

Can any of you guys chime in so we can have a group discussion here =]

-Cheers,
Eric Zheng

 

ColdFeet, i got your harness in today. Just finished replacing it with a male connector. I will be shipping it out with tracking number provided. Postage refunded to your paypal account, thanks!


p.s. tracking # 9405 5036 9930 0292 1305 52

-Eric

 

I had hoped to get mine installed this week but there was a snafu with the PNP wiring harness connector, so waiting on a corrected one.

I'll be going a bit of a different route with regards to the instructions. Since I have already removed all of the other solenoids (DT and emissions stuff), I'll be removing the rest of the rats nest and cleaning up under the UIM.

 

Your's has been shipped the same day with the GB#2 people, which should be there soon =P

-Eric

 

Great thanks Eric. I'll see if I can get some pics up once I have a chance to work on the car.

 

NP, I am glad my customers' as happy as I am. =]

-Eric

 

Received package today but I was thought I was to get check valves and vacuum "Y" connectors with order. i also did a continuity check and the male plug labeled X and the spade connector leads seem to be mixed up!!

 

I am sorry guys, been too hectic getting ready to buy a house, work and such... got myself overloaded. I will have the Ys and check valves ship out to everyone asap today. And as for the connector, what you mean by it is mixed up?

Looking at the harness connector(on harness side, not solenoid side)looking at the pins:

1 2 3 4
5 6 7 8

4 and 8 should be for X. Where as 15= E , 26 = H, 37 = F.

And on the solenoid connector side looking at the pins:

1 2 3 4
5 6 7 8

15 = X
26 = F
37 = H
48 = E

My apologies as this is NOT an excuse for my mistake. Sorry for the delay, it is being packed and shipped now.

-Eric

 

KYLE HEFTE 9405 5036 9930 0292 7809 48
MATT PAUL 9405 5036 9930 0292 7809 55
BRYAN COOMBS 9405 5036 9930 0292 7809 31
PHILIP BOWEN 9405 5036 9930 0292 7809 24

Thanks in advance!

-Eric

 

The harness is not mixed up! Its me that's mixed up! Sorry!

The assembly looks real nice and is smaller than I expected. Should be an easy instal!

Thanks!