wastegate actuator for TO4B on S5 hot side
#1
Senior Member
Thread Starter
wastegate actuator for TO4B on S5 hot side
Have an S5 hot side mated to a T04B cold side.
I need a wastegate actuator and bracket for it.
Aside from BNR, any1 have a suggestion on a source for a wastegate actuator and bracket that will work?
Prefer an actuator w/a 10-12 psi rating.
I need a wastegate actuator and bracket for it.
Aside from BNR, any1 have a suggestion on a source for a wastegate actuator and bracket that will work?
Prefer an actuator w/a 10-12 psi rating.
Last edited by Clubuser; 10-01-18 at 03:05 PM.
The following users liked this post:
Clubuser (10-02-18)
#3
Winter Rotary
iTrader: (5)
I actually just installed a Garrett t04b actuator bracket on my hybrid with a turbosmart dual port wastegate actuator (universal). Obviously trimming of the rod and the clevis were necessary to make it work, but it wasn't bad. If I had to do it again, I'd just cut the stock actuator off its bracket, drill holes for the new actuator and weld in a bit of an extension. It'd be straighter.
The following users liked this post:
Clubuser (10-02-18)
#4
Senior Member
Thread Starter
I actually just installed a Garrett t04b actuator bracket on my hybrid with a turbosmart dual port wastegate actuator (universal). Obviously trimming of the rod and the clevis were necessary to make it work, but it wasn't bad. If I had to do it again, I'd just cut the stock actuator off its bracket, drill holes for the new actuator and weld in a bit of an extension. It'd be straighter.
Is this the bracket you got? Actually bolts to both the T3 and T4?:
https://www.ebay.com/itm/T3-T4-T04B-...ss!90011!US!-1
Was thinking this1 gives me flexibility on positioning. Just not sure of the bolt down radius. :
https://www.ebay.com/itm/Universal-Turbo-Wastegate-Actuator-Bracket-for-IHI-TOYOTA-GARRETT-GT28R-GT30R/262953002410?epid=2116905167&hash=item3d393865aa:g :5yEAAOSwKVNYXNFq
Last edited by Clubuser; 10-02-18 at 10:45 AM.
The following users liked this post:
Clubuser (10-02-18)
Thread
Thread Starter
Forum
Replies
Last Post
red_dragon
3rd Generation Specific (1993-2002)
3
04-25-09 04:16 PM