wastegate actuator for TO4B on S5 hot side
Have an S5 hot side mated to a T04B cold side.
I need a wastegate actuator and bracket for it. Aside from BNR, any1 have a suggestion on a source for a wastegate actuator and bracket that will work? Prefer an actuator w/a 10-12 psi rating. |
Haven't used one personally, but Kinugawa make one with different spring sets available. They are widely available on eBay.
|
I actually just installed a Garrett t04b actuator bracket on my hybrid with a turbosmart dual port wastegate actuator (universal). Obviously trimming of the rod and the clevis were necessary to make it work, but it wasn't bad. If I had to do it again, I'd just cut the stock actuator off its bracket, drill holes for the new actuator and weld in a bit of an extension. It'd be straighter.
|
Originally Posted by Acesanugal
(Post 12304889)
I actually just installed a Garrett t04b actuator bracket on my hybrid with a turbosmart dual port wastegate actuator (universal). Obviously trimming of the rod and the clevis were necessary to make it work, but it wasn't bad. If I had to do it again, I'd just cut the stock actuator off its bracket, drill holes for the new actuator and weld in a bit of an extension. It'd be straighter.
Is this the bracket you got? Actually bolts to both the T3 and T4?: https://www.ebay.com/itm/T3-T4-T04B-...ss!90011!US!-1 Was thinking this1 gives me flexibility on positioning. Just not sure of the bolt down radius. : https://www.ebay.com/itm/Universal-Turbo-Wastegate-Actuator-Bracket-for-IHI-TOYOTA-GARRETT-GT28R-GT30R/262953002410?epid=2116905167&hash=item3d393865aa:g :5yEAAOSwKVNYXNFq |
|
All times are GMT -5. The time now is 06:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands