Self Rebuild...
#1
Junior Member
Thread Starter
Join Date: May 2001
Location: -
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Self Rebuild...
I'm going to attempt to rebuild my '90 N/A 13b, and I need a few pointers. I already have the Haynes manual, and I am wondering if I should purchase the "13B Rebuild VHS Tape" from www.AtkinsRotary.com. Has anybody seen this video before, and would it be a good purchase? Also, I don't want to have to replace anything that doesn't absolutely need replacing ( just trying to be cost efficient ) so is there any suggestions of places that will give me a good deal on individual rebuild parts (other than Atkins Rotary)? Any help with these subject, or tips in general would be greatly appreciated.
Thanks,
XxMaCaBrExX
Thanks,
XxMaCaBrExX
#3
Junior Member
Join Date: Sep 2001
Location: Marietta, GA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
GET IT!
By all means, get the video.
If that is Bruce Turrentine's video, it is
excellent. I own it. I'm using it to help
me rebuild my TII right now. An invaluable
help. Worth every penny.
If its not Bruce's video, get both - you can't get enough good advice, IMHO. Do a search on Bruce's name, he has a copy for sale through one of the rotary aviation sites.
Good luck,
Steve C.
If that is Bruce Turrentine's video, it is
excellent. I own it. I'm using it to help
me rebuild my TII right now. An invaluable
help. Worth every penny.
If its not Bruce's video, get both - you can't get enough good advice, IMHO. Do a search on Bruce's name, he has a copy for sale through one of the rotary aviation sites.
Good luck,
Steve C.
#4
Full Member
Join Date: Apr 2001
Location: Vancouver, WA, USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I bought Bruce's video also...it is great.
I ended up not rebuilding my engine though... I found buying a factory rebuild from the dealer in Canada was only a couple hundered bucks more than just buying the rebuild parts.
Because I wasn't going to port my engine, and the only mod I wanted to do was replace the oil regulator pelet with the Mazdatrix solid eliminator I just went with the ready to go engine.
I ended up not rebuilding my engine though... I found buying a factory rebuild from the dealer in Canada was only a couple hundered bucks more than just buying the rebuild parts.
Because I wasn't going to port my engine, and the only mod I wanted to do was replace the oil regulator pelet with the Mazdatrix solid eliminator I just went with the ready to go engine.
Thread
Thread Starter
Forum
Replies
Last Post
93red
3rd Generation Specific (1993-2002)
9
04-24-06 08:51 AM
Schmitty
2nd Generation Specific (1986-1992)
9
04-21-05 03:47 AM