13 B Identification
#1
Full Member
Thread Starter
Join Date: Apr 2003
Location: Pikes Peak area
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
13 B Identification
Help! I need to know how to identify one 13B from another.
After swapping in a 13 B into my 79 doner, I have a bad oil leak from around the pan. I ordered the new pan gasket and since I was there anyway, an oil pan baffle. I was told by the seller the engine was an 86 13B. I ordered the parts for that motor; neither fit. I'm assuming an 86 may be different from an 84 etc. I have an autocross on the 29th and I can put it back together with the old gasket, but I still need to know. Any help is much appreciated.
After swapping in a 13 B into my 79 doner, I have a bad oil leak from around the pan. I ordered the new pan gasket and since I was there anyway, an oil pan baffle. I was told by the seller the engine was an 86 13B. I ordered the parts for that motor; neither fit. I'm assuming an 86 may be different from an 84 etc. I have an autocross on the 29th and I can put it back together with the old gasket, but I still need to know. Any help is much appreciated.
#2
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
I believe the 89-91 has the knock sensor above the T1 whereas the 86-88 is NOT there Dunno where.
Hope this helps because that is all I can think of
Hope this helps because that is all I can think of
#3
Full Member
Thread Starter
Join Date: Apr 2003
Location: Pikes Peak area
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
My bad. I needed to ask about differentiating between 84, 85 and later models. The older block/case is about
1-1 1/2 longer. Now I have a gasket and baffle for the 86. Anyone want to buy them?
1-1 1/2 longer. Now I have a gasket and baffle for the 86. Anyone want to buy them?
#6
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
the 84-85 13b may be longer cause it has a different front cover. The engine mounts are on the front cover I believe, and on the 86+ the mounts are on the front end plate.
I thought you were saying the 12A was longer than the 13B
I thought you were saying the 12A was longer than the 13B
#7
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
I think you mean the center plate? Also the 2nd gen has the pass mount through the oil pan.
Originally posted by Project84
and on the 86+ the mounts are on the front end plate.
and on the 86+ the mounts are on the front end plate.
Trending Topics
#8
Moderator
iTrader: (3)
there are several differences between the old 13Bs and the newer 13Bs ...
the ones that matters with respect to the oil pan are these:
1 - the older engines have a different shaped front cover (as Project84 stated)
2 - the newer ones are distinguished also by the little flap on the left side where it makes a provision for the engine mount
the ones that matters with respect to the oil pan are these:
1 - the older engines have a different shaped front cover (as Project84 stated)
2 - the newer ones are distinguished also by the little flap on the left side where it makes a provision for the engine mount
Thread
Thread Starter
Forum
Replies
Last Post