Anyone know a writeup on using Hi Imp injectors in Low Imp car?
10-08-05, 06:58 PM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Cut the Solenoid Resistor Package wires mid way b/t the plug and the resistor package.
Put the resistor package on a shelf in the garage.
Splice ALL FIVE wires that go to the plug TOGETHER.
Reinstall the plug. Done.
http://www.teamfc3s.org/forum/showth...threadid=33353
Put the resistor package on a shelf in the garage.
Splice ALL FIVE wires that go to the plug TOGETHER.
Reinstall the plug. Done.
http://www.teamfc3s.org/forum/showth...threadid=33353
Last edited by HAILERS; 10-08-05 at 07:03 PM.
10-08-05, 10:16 PM
#7
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Here. That took all of forty five minutes counting going to the shed, doing the job and making six jpgs and posting five of them.
Last edited by HAILERS; 10-08-05 at 10:18 PM.
The following users liked this post:
fidelity101 (05-13-18)
Trending Topics
10-08-05, 10:30 PM
#9
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Originally Posted by SonicRaT
Damn HAILERS, you're way too damn nice, lol. I'd of just said:
READ THE FSM N00B!
READ THE FSM N00B!
JPG of proper ratcheting crimpers and wire stripper attached.
Last edited by HAILERS; 10-08-05 at 10:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post