Rebuild Project Pictures
Thread Starter
OBEY YOUR MAZDA
Joined: Oct 2002
Posts: 3,060
Likes: 2
From: Denmark
OKAY I now have allmost 600km on my rebuild motor, took it to the redline in first two gears, this motor pulls like a motha fooka.
And due to the moderate primary porting it is also streetable at low rpms, but once it gets above 3500 or so the fun begins.
It also uses the gears more...1st gear = 60 kmh--2nd gear = 115kmh and I can actually feel my body getting pushed back into the seat when accelerating hard.
I must get the Apexi SAFC2 installed again and get this thing dynoed
And due to the moderate primary porting it is also streetable at low rpms, but once it gets above 3500 or so the fun begins.
It also uses the gears more...1st gear = 60 kmh--2nd gear = 115kmh and I can actually feel my body getting pushed back into the seat when accelerating hard.
I must get the Apexi SAFC2 installed again and get this thing dynoed
Racingbeat dealer
Joined: Dec 2002
Posts: 787
Likes: 1
From: Uden (AFB Volkel), The Netherlands
Originally Posted by AbortRetryFail
European S4's use a distributor instead of the CAS and coilpacks? Weird!
Not weird..... it's called STOCK over here ;-)
owner has gotten a nicer ride in the mean time..... check that out!
Thread Starter
OBEY YOUR MAZDA
Joined: Oct 2002
Posts: 3,060
Likes: 2
From: Denmark
Which will soon be spinning again, I spend the week rebuilding the motor with the homemade P.Port housings. Currently waiting for a clutch from Demon Tweeks, who are probably waiting for my clutch from Tilton 
Thread
Thread Starter
Forum
Replies
Last Post
